GENERAL MALFUNCTION
If the equipment malfunctions, this may be because an electrostatic discharge or AC line interference has corrupted the information in the equipment memory circuits. Therefore:
-disconnect the plug from the AC line supply
-after waiting at least three minutes, reconnect the plug to the AC line supply
-
Memory backup
• In case a power outage occurs or the power |
cord is accidentally unplugged, the SR4001/ |
SR5001 is equipped with a backup function |
TECHNICAL
SPECIFICATIONS
FM TUNER SECTION
Frequency Range | 87.5 – 108.0 MHz | |
Usable Sensitivity | IHF 1.8 µV/16.4 dBf | |
Signal to Noise Ratio | Mono/Stereo 75/70 dB | |
Distortion | Mono/Stereo 0.2/0.3 % | |
Stereo Separation | 1 kHz 45 dB | |
Alternate Channel Selectivity | .................± 300 kHz 60 dB | |
Image Rejection | 98 MHz 70 dB | |
Tuner Output Level | 1 kHz, ± 75 kHz Dev 800 mV | |
AM TUNER SECTION
VIDEO
Television Format | NTSC/PAL | |
Input Level/Impedance | 1 | |
Output Level/Impedance | 1 | |
Video Frequency Response | 5 Hz to 8 | MHz (– 1 dB) |
Video Frequency (Component) .... | 5 Hz to 80 | MHz (– 1 dB) |
S/N | 60 dB | |
GENERAL (SR4001)
Power Requirement | AC 230 V 50 Hz/60Hz |
Power Consumption | 500 W |
Weight | 11.4 Kg |
GENERAL (SR5001) |
|
Power Requirement | AC 230 V 50 Hz/60Hz |
Power Consumption | 600 W |
Weight | 12.3 Kg |
ACCESSORIES |
|
Remote Control Unit RC5001SR | 1 |
2 | |
FM Antenna | 1 |
AM Loop Antenna | 1 |
Front AUX Jack Cover | 1 |
AC Power Cord | 1 |
Specifications subject to change without prior notice.
ENGLISH
to prevent memory data such as the preset |
memory from being erased. |
HOW TO RESET THE UNIT
AV SURROUND RECEIVER SR5001
Should the operation or display seem to be abnormal, reset the unit with the following procedure.
To turn on the SR4001, press and hold the 7.1CH INPUT and ATT buttons simultaneously for 3 seconds or more.
To turn on the SR5001, press and hold the MULTI and ATT buttons simultaneously for 3 seconds or more.
Remember that the procedure will reset the settings of the SOURCE, Surround mode, delay time, TUNER PRESET etc., to their initial settings.
Frequency Range | 531 – 1602 kHz |
Signal to Noise Ratio | 50 dB |
Usable Sensitivity | Loop 400mV/m |
Distortion | 400Hz, 30 % Mod. 0.5 % |
Selectivity | ± 20 kHz 70 dB |
AUDIO SECTION (SR4001)
Power Output (20 Hz – 20 kHz/THD=0.08%) |
| ||
Front L&R | 8 ohms 80 W / Ch | ||
Center | 8 ohms 80 W / Ch | ||
Surround L&R | 8 ohms 80 W / Ch | ||
Surround Back L&R | 8 ohms 80 W / Ch | ||
Front L&R | 6 ohms 105 W / Ch | ||
Center | 6 ohms 105 W / Ch | ||
Surround L&R | 6 ohms 105 W / Ch | ||
Surround Back L&R | 6 ohms 105 W / Ch | ||
Input Sensitivity/Impedance | 168 mV/ 47 Kohms | ||
Signal to Noise Ratio(Analog Input / Pure Direct) .... | 105 dB | ||
Frequency Response |
|
| |
(Analog............................................Input / Pure Direct) | 8 Hz – 100 kHz (± 3 dB) | ||
(Digital...........................................Input / 96 kHz PCM) | |||
AUDIO SECTION (SR5001) |
|
|
|
Power Output (20 Hz – 20 kHz/THD=0.08%) |
| ||
Front L&R | 8 ohms 90 W / Ch | ||
Center | 8 ohms 90 W / Ch | ||
Surround L&R | 8 ohms 90 W / Ch | ||
Surround Back L&R | 8 ohms 90 W / Ch | ||
Front L&R | 6 ohms 110 W / Ch | ||
Center | 6 ohms 110 W / Ch | ||
Surround L&R | 6 ohms 110 W / Ch | ||
Surround Back L&R | 6 ohms 110 W / Ch | ||
Input Sensitivity/Impedance | 168 mV/ 47 Kohms | ||
Signal to Noise Ratio(Analog Input / Pure Direct) .... | 105 dB | ||
Frequency Response |
|
| |
(Analog Input / Pure Direct)
........................................... 8 Hz – 100 kHz (± 3 dB)
(Digital Input / 96 kHz PCM)
............................................ 8 Hz – 45 kHz (± 3 dB)
DIMENSIONS
440 mm
AV SURROUND RECEIVER SR5001
23 mm
341 mm | 384 mm |
20 mm
146 mm | 160 mm |
14 mm |
|
43
