Marantz manual MULTI ROOM SR5001 only, 7 7.1 CH INPUT LEVEL

ENGLISH	7 7.1 CH INPUT LEVEL
	This sub-menu is to adjust the speaker levels for 7.1-
	channel input sources.
	Here you will adjust the volume for each channel so
	that they are all heard by the listener at the same
	level.
		7 7.1 CH. INPUT LEVEL
		VIDEO-IN	:	LAST
		FRONT L	:	0	dB
		CENTER	:	0	dB
		FRONT R	:	0	dB
		SURR.R	:	0	dB
		SURR.B R	:	0	dB
		SURR.B L	:	0	dB
		SURR.L	:	0	dB
		SUB W	:	0	dB
		MAIN			EXIT

1. Select “7.1CH INPUT” in the SETUP MAIN MENU with the 3 or 4 cursor buttons, and press the ENTER button.

2. To select “VIDEO IN”, press 3 or 4 cursor button.

3. Using the 1 or 2 cursor buttons, select the video input source which is emitted from Monitor out in the 7.1 CH INPUT function.

The input source is switched by pressing the 1 or 2 cursor buttons as follows;

LAST ↔ TV ↔ DVD ↔ VCR1 ↔ DSS ↔

AUX1 ↔ V-OFF ↔ LAST ↔

Notes:

•When select LAST, the source is set previous source before 7.1 CH INPUT function is activated.

•When select V-OFF, no signal is emitted from monitor out terminal.

4.To Select desired channel , press the 3 or 4 cursor buttons.

5.Using the 1 or 2 cursor buttons, adjust the volume level of each channel.

6.After you complete this portion of the set up, move the cursor to “MAIN” with the 3 or 4 cursor buttons and press the ENTER button.

Notes:

•These settings will be memorized to 7.1CH INPUT source.

•This feature can be directly selected with the CH.SEL button of the remote controller.

8 MULTI ROOM (SR5001 only)

SR5001 has features in MULTI ROOM SYSTEM such as source selector, sleep timer, Multi Room Speaker output and remote control.

You can set these feature in this sub-menu.

8 MULTI ROOM

AUDIO	: DVD
SLEEP TIMER	: OFF
MULTI:OUT	: STEREO
MULTI:OFF	MSPK :
VOL	: VARI
LEVEL	: -90dB
--- MAIN ROOM STATUS ---
VIDEO:DVD	AUDIO:DVD
MAIN	EXIT

1. Select “MULTI ROOM” in the SETUP MAIN MENU with 3 or 4 cursor button, and press the ENTER button.

2. To Select desired contents, press 3or 4cursor button

AUDIO:

Select the audio source of the Multi-room output with 1 or 2 cursor buttons.

SLEEP TIMER:

SLEEP timer function is available during the multiroom is active, set the time with 1 or 2 cursor buttons.

MULTI OUT:

To switch MULTI and MSPK outputs to either STEREO or MONO, press 1 or 2 cursor button.

MULTI (MULTI ROOM):

To switch on the Multi-room output ON or OFF, press 1 or 2 cursor button.

VOL (VOLUME SETUP):

Select whether the Multi-room output level is variable or fixed with a 1 or 2 cursor buttons.

LEVEL (VOLUME LEVEL):

Adjust the Multi-room output level with 1 or 2 cursor buttons.

MSPK B (MULTI SPEAKER B):

To switch on the Multi-speaker B output ON or OFF, press 1 or 2 cursor buttons.

Note:

This setting can be changed when the Surr Back is set “NONE” in 2-1 SPEAKER SIZE menu. When this setting is unavailable, “✽✽✽” is displayed

VOL (VOLUME SETUP):

Select whether the Multi-speaker output level is variable or fixed with a 1 or 2 cursor buttons.

Note:

This setting can be changed when the Surr Back is set “NONE” in 2-1 SPEAKER SIZE menu. When this setting is unavailable, “✽✽✽” is displayed

LEVEL (VOLUME LEVEL):

Adjust the Multi-speaker output level with 1 or 2 cursor button.

Note:

This setting can be changed when the Surr Back is set “NONE” in 2-1 SPEAKER SIZE menu. When this setting is unavailable, “✽✽✽” is displayed

MAIN ROOM STATUS:

Selected input source in the main room will be displayed.

Note:

If “VOLUME” is set to “FIXED”, the multi-room output level cannot be adjusted from the second zone.

After you complete this portion of the set up, move the cursor to “MAIN” with 3 or 4 cursor buttons and press ENTER button.

28