Sunfire III On Screen Display (OSD)

CHAPTER 4

On Screen Display (OSD)

Video Connections

The On Screen Display (OSD) is present at the composite video or S-video MAIN outputs. It is also present at the output labeled VID2/MON2, but only if it is set to MON2. Make sure that your TV monitor's video input is connected correctly to one of these outputs.

Note: The component video signal path uses broadcast-quality components with no OSD in the path. This assures no possiblity of coloration of the video signal.

OSD Activation

MAIN	MON2			No OSD from:
				•	Component video outputs
AUDIO/VIDEO OUTPUTS		COMPONENT VIDEO IN	COMPONENT OU	•	VCR outputs
				• VID2/MON2 set to VID2
MAIN	VCR VID2/MON2	DVD SAT VID1	MAIN MON2
			Y
MAIN	VCR VID2/MON2		Cr

Cb

MAIN VCR VID2/MON2

DIGITAL AUDIO INPUTS

DVD SAT VID1 CD DVD

CD

The OSD is activated using the remote's MENU button (with the remote set to operate the TGIII).

The joystick pad and surrounding buttons allow you to navigate through the OSD menus to control and customize many features of the TGIII.

Press EXIT to quit the OSD at any time. Any changes you make will be saved.

Note that the TGIII front panel display shows abbreviated text when the OSD is activated.

GUIDEMENU

MODE MODE

EXITINFO

Quick Information

Pressing INFO at any time will bring up a short description of the source you are listening to. For example if you are listening to a DVD, the TV display might show:

DVD DIGITAL 48K

DOLBY EX 5.1 / 5.1 where:

DVD is the selected input, DIGITAL is the signal type, 48K is the sample rate, DOLBY EX is the mode,

5.1is the input format,

5.1is the output (i.e. fi ve speakers and a subwoofer).

30

User's Manual