
User's Manual
Biwiring
If your speakers can be biwired or biamped, they will have separate input terminals for the woofer section and the upper range.
Inputs
Tweeter
Woofer
Make sure that any links
between thewoofer and upper range posts are removed from the speakers when you want to biamp or biwire them. Consult your speaker owner’s manual for details.
Each channel of the Sunfire Amplifier has two pairs of outputs. One idea is to use the voltage source to drive the woofer, and the current source to drive the upper range. This will offer improved performance compared to conventional wiring.
•Connect the amplifier’s right voltage source output to the right speaker’s woofer input terminals.
•Connect the amplifier’s right current source output to the right speaker’s upper range input terminals.
•Connect the amplifier’s left voltage source output to the left speaker’s woofer input terminals.
•Connect the amplifier’s left current source output to the left speaker’s upper range input terminals.
•Connect your preamplifier’s outputs to the amplifier’s corresponding inputs.
| UNBALANCED | |
PREAMP | ||
R | OUTPUTS | |
L | ||
|
+ -
RIGHT
TWEETER (CURRENT SOURCE)
+ - | + - | |
RIGHT | ||
LEFT | ||
WOOFER | ||
TWEETER | ||
(VOLTAGE | ||
(CURRENT | ||
SOURCE) | ||
SOURCE) | ||
| ||
LOUDSPEAKERS |
+ -
LEFT
WOOFER (VOLTAGE SOURCE)
System Configurations | 17 | |
|
|
|