User's Manual

Standard Edition Specifications

Power output

325 watts continuous, per channel, both channels driven into eight ohms, from 20Hz-20kHz with no more than 0.5% T.H.D.

Power at clipping, minimum:

650 watts per channel into four ohms.

1300 watts per channel into two ohms (time limited basis).

Hum and Noise

-115 dB, A-Weighted

12VDC Trigger Inputs

Input voltage range: 5VDC-18VDC

Impedance: approx 600(20mA @ 12V)

Power Consumption

45W

At idle

150W

Typical (1/8th power)

1800W

Absolute Max (Fuse Limit)

Dimensions

17.0 inches wide

5.9 inches high (including feet)

16.7 inches deep (to tips of connectors)

Maximum output current

80 amperes peak to peak per channel

Maximum output voltage

51 Vrms

Output impedance

Voltage source: Approximately zero ohms

Current source: Approximately one ohm

Input impedance, RCA inputs

24k

Input sensitivity for rated output

Unbalanced: 1.8 Vrms

Balanced: 0.9 Vrms

Input impedance, XLR inputs

24k, each leg balanced to ground Female XLR

Pin 1 is ground

Pin 2 is positive (hot) Pin 3 is negative (cold)

Weight

33 lbs

Finish

Brushed aluminum and black anodize

© 2001 Sunfire Corporation.

All rights reserved. Sunfire Corporation reserves the right to improve its products at any time. Therefore, specifications are subject to change without notice.

Manual part number : 913-041-00 Rev A

Standard Edition Specifications

9