Room Equalization (EQ) Procedure

Subwoofer performance is greatly af- fected by the room in which it is situated, and the positioning within the room. The room effects will boost and cut the output levels reaching your listening position. This gives a "Room EQ" effect which can often be far from wonderful.

The Sunfire True Sub EQ can automati- cally adjust for the effects of Room EQ. It measures the actual frequency response using the supplied measurement micro- phone. Then it automatically compen- sates for peaks or dips and smooths out the response.

For best results it is recommended that the subwoofer crossover in your receiver or processor be set to its maximum set- ting (or “bypass”). This ensures that the subwoofer will be properly matched to the rest of the speakers in your system.

The following procedure will help you start the automatic equalization:

Automatic EQ Mode

1.Install the True Sub EQ in the best loca- tion you can find (see previous page).

2.The calibration must be done while the listening room is quiet. Please turn off any noisy machinery, including heating or cooling systems during this process. Have the kids play in the backyard and give the dog a treat to have him stop barking. A small amount of noise, such as quiet talking or whispering, is OK.

3.Place the microphone in the listening position (on the couch, for example), pointing in the direction you’ll normally be facing while listening to your system. Only use the microphone supplied by Sunfire.

4.Plug the microphone into the subwoof- er's microphone jack.

5.Set these controls:

•Volume to 0 dB.

•Crossover to "Bypass."

•Phase to "Normal."

•Equalizer Authority to "Normal"

6.Turn on the subwoofer AC power switch and press the Start button to go from standby to play mode. The yellow LEDs should light up. Press Start again, and hold it a moment to start the calibration.

7.The subwoofer will generate a test tone sweep, slowly increasing up the fre- quency scale; the microphone will take measurements of the sound arriving at your listening position. The LEDs will flash randomly for a while, then the pairs will gradually glow constantly as each band is measured. This sequence will repeat twice until the measurements are complete. The LEDs will all blink once and stay on, and the test tones will stop.

If you find that the first test tone plays louder and louder, and never leaves the first band, then either the microphone is too far away from the subwoofer, or it is not plugged in correctly.

8.The procedure may take several minutes. Do not make any loud noise during this process, as it may affect the accuracy and/or make it take longer.

12 5SERgS -ANUAL

Page 11 Page 13
Page 12
Image 12
Sunfire Solitaire 10 user manual Room Equalization EQ Procedure, Automatic EQ Mode
Page 11 Page 13

Solitaire 10 specifications

Sunfire Solitaire 10: A Benchmark in High-Performance Audiophile Speakers

The Sunfire Solitaire 10 is a standout innovation in the world of audiophile-grade speakers, marrying advanced technology with exceptional sound quality. Designed by renowned audio engineer Bob Carver, Sunfire has a reputation for producing speakers that deliver powerful, immersive audio experiences. This model continues that legacy with its unique features and characteristics.

One of the standout features of the Sunfire Solitaire 10 is its proprietary "High Definition" technology, which ensures a balanced and accurate audio reproduction across a wide frequency range. This technology minimizes distortion and maximizes clarity, making every note and lyric crisp and precise. The speaker adeptly handles dynamic music genres, providing an emotional depth that is particularly appealing to discerning listeners.

The Solitaire 10 is equipped with a 10-inch high-excursion subwoofer that delivers deep bass without compromising detail in higher frequencies. This subwoofer provides robust low-end performance, allowing users to feel the impact of the music as if they were in a live concert environment. The carefully designed cabinet structure minimizes resonance, ensuring that sound remains clear and undistorted even at high volumes.

Incorporating advanced materials like aluminum and high-density MDF, the Solitaire 10 is built to last while minimizing unwanted vibrations. The cabinet’s construction employs an innovative bracing system that further enhances its acoustic performance, providing a stable platform for sound to travel unimpeded.

Connectivity is made easy with the inclusion of multiple input options, including standard speaker wire connections and binding posts, which allow for versatile setups. This flexibility ensures compatibility with various amplifiers and home theater systems.

The aesthetic design of the Sunfire Solitaire 10 reflects its high-performance capabilities. With a sleek, modern look, the speaker can seamlessly integrate into any living space. The premium finish and attention to detail make it as visually appealing as it is sonically impressive.

In conclusion, the Sunfire Solitaire 10 stands as a commendable achievement in speaker technology, featuring high-definition sound, powerful bass response, durable construction, and attractive design. It’s an ideal choice for audiophiles and casual listeners alike who seek an outstanding listening experience that truly encapsulates the essence of their favorite music. Whether in a dedicated listening room or part of a home theater setup, the Sunfire Solitaire 10 is poised to elevate any audio experience to new heights.
Top Page Image Contents