Specifications (Solitaire 10)
Amplifier Output
1,250 watts rms (3.3 Ω impedance)
High Cut Filter
30 Hz - 100 Hz adjustable, with a "Bypass" position.
Frequency Response
18 Hz - 100 Hz
Power Line Voltage
US model
120 VAC 50/60 Hz
International model 230 VAC 50/60 Hz
Dimensions
11" x 11" x 11"
Weight
40 lbs
0.75 Vrms from right input with volume control at 0 dB, 200 mVrms volume control fully clockwise*
Input Impedance:
30 kΩ for
56 kΩ for
40 kΩ for XLR input, each leg balanced to ground
XLR Input
Pin 1 | Ground |
Pin 2 | Positive |
Pin 3 | Negative |
Driver: 10 inch
Extra large magnet and long throw mechanical design yield very high
Finish
High gloss, black lacquer finish.
Removable fabric grill.
Line Power Consumption:
350 watts average, at maximum continu- ous output. 8 watts at idle.
Output Levels:
Greater than 107 dB peak SPL (includes room gain) from 18 Hz to 80 Hz. Mea- surement is one meter, anechoic.
A typical Sunfire subwoofer can be expected to ‘best’ its specified minimum peak SPL by several decibels.
Total Harmonic Distortion
Typically less than 1/10 of the funda- mental between 18 to 80 Hz.
Internal System Gain:
46 dB from left input jack to speaker with volume control at 0 dB, 56 dB with control fully clockwise*
36 dB from right input jack to speaker with volume control at 0 dB, 48 dB with control fully clockwise*
* The Sunfire True Subwoofer utilizes differential gain on the left and right inputs to retain both L+R and
12 VDC Trigger Input
Input voltage range: 5
Impedance: approx 600 Ω (20 mA @ 12 V)
Removable terminal block, and one 1/8” Mono minijack, tip positive.
Input Sensitivity (full output):
250 mVrms from left input with volume control at 0 dB, 60 mVrms volume con- trol fully clockwise *
© 2004 Sunfire Corporation.
All rights reserved. Sunfire Corporation reserves the right to improve its products at any time. Therefore, specifications are subject to change without notice.
Manual
20 
5SERgS
