Sunfire TGA-5200(E), TGA-5400(E) manual Balanced Connections, Sat

CHAPTER 2

Balanced Connections

If your preamplifier has XLR outputs, it can be connected to the XLR inputs as shown. This example shows the connec- tions to the Sunfire Theater Grand Processor TGP-5. This also shows the Current Source output connections to the front left and right speaker inputs. (The Voltage Source outputs can be used instead, as shown on the previous page.)

Sunfire Theater Grand Processor TGP-5

MA
NUFACTURED UNDER			LICENSE
FROM DOLBY LABO
"DOLBY",		RATORIES.
	"PRO-LOGIC" AND THE
DOUBLE-D SYMBOL ARE
TRADEMARKS OF DOLBY
LABORATORIES.

C

R

12 VDC Trigger signal From: Preamplifier trigger

outputs

To: Amplifier trigger inputs

								RS
DVD IN								SAT IN
MANUFACTURED			UNDER LICENSE
SYSTEMS,								FROM DIGITAL
	INC. US PAT. NO.									THEATER
5,978,762 AND OTHER						5,451,942, 5,956,674,
PENDING.	"DTS",				WORLD-WIDE				5,974,380,
"NEO:6" ARE			"DTS-ES EXTENDEDPATENTS ISSUED AND
		TRADEMARKS OF						SURROUND" AND
SYSTEMS, INC. COPYRIGHT							DIGITAL THEATER
SYSTEMS, INC. ALL						1996,	2000, DIGITAL		THEATER
				RIGHTS RESERVED.

SW

HDMI OUT

Balanced line-level audio signals From: Preamplifier XLR outputs To: Amplifier XLR inputs

LS

L

RS

R

C

MINIMUM
SPEAKER
LOAD IMPED
ANCE 4	OHMS

+		+	+
R				+
		RS
			C
				LS
	LOUDSPEAKERS

+

L

Speaker-level audio outputs

From: Amplifier outputs

To: Speaker input posts

The 12 VDC trigger connection shown can be used to turn the ampli- fier on when the preamplifier turns on. Alternatively, you could use the ampli- fier's AUTO-ON switch. The amplifier will then automatically turn on when a preamp audio signal is received.

11

User's Manual