System Configurations
The following pages show some typical connections that you might make in your installation. They show how the inputs and outputs of the Sunfire Subwoofer are connected to your preamplifier or receiver.
Connections to a preamplifier’s subwoofer output
If your preamplifier has a subwoofer output (often labeled LFE for Low Frequency Effects), it can be connected to the subwoofer’s Left (Mono) input as shown. This is the simplest and recommended connection. A receiver with a sub/LFE output can be connected in the same way.
The subwoofer will play the low frequency range and the other speakers will play the frequency range delivered to them by your amplifier.
PREAMPLIFIER
R | L |
If you have a home | SUB/LFE |
theater preamplifier, it may |
|
have an independent |
|
subwoofer volume and |
|
crossover control. Make |
|
sure this is correctly |
|
adjusted, and that the |
|
Sunfire Subwoofer’s | AMPLIFIER |
|
crossover frequency is set to 100 Hz. This is by no means an
on page 6 and adjustments on page 15).
OUT | MAIN | |
OUTPUTS | ||
|
R | L | |
INPUTS | ||
|
You can set the subwoofer’s Bass
Level control to 0dB, and then use the preamplifier’s subwoofer level control for normal and routine adjustments.
TO FRONT SPEAKERS
User's Manual 
11