Specifications
Amplifier Output
1,250 W rms (3.3 Ω impedance)
High Cut Filter
35 Hz - 100 Hz adjustable.
Frequency Response
18 Hz - 100 Hz.
Low pass is
Power Line Voltage
AC 120 V, 50/60 Hz
Dimensions
11" x 11" x 11"
Weight
40 lbs
Finish
Black anodize and black lacquer. removable fabric grill.
Line power consumption:
350 W average, 18 Hz to 100 Hz, at absolute maximum continuous output. 8 W at idle.
Output levels:
Greater than 107 dB peak SPL (includes room gain) from 18 Hz to 100 Hz. Measurement method is one meter, anechoic, including room gain.
A typical Sunfire subwoofer can be expected to ‘best’ its specified minimum peak SPL by several decibels.
THD:
Less than 1/10 of the fundamental between 18 and 80 Hz
Input sensitivity for full output:
250 mVrms from left input with volume control at 0dB, 60 mVrms with volume control fully clockwise*
0.75Vrms from right input with volume
control at 0dB, 200 mVrms with volume control fully clockwise*
Input impedance:
15 KΩ for
15 KΩ for
Driver:
Extra large magnet and long throw mechanical design yield very high back- emf. The result is extraordinarily high operating efficiency – that is, more acoustic output for each watt of input.
Internal system gain:
46 dB from left input jack to speaker with the Bass Level control at 0 dB, 56 dB with the control fully clockwise*
36 dB from right input jack to speaker with the Bass Level control at 0 dB,
48 dB with the control fully clockwise*
*The Sunfire Subwoofer utilizes differential gain on the left and right inputs to retain both L+R and
© 2002 Sunfire Corporation.
All rights reserved. Sunfire Corporation reserves the right to improve its products at any time. Therefore, specifications are subject to change without notice.
Manual part number
16 User's Manual