Manuals / Sunrise Medical / Personal Care / Mobility Aid

Sunrise Medical Trek 3, 4 To Reduce the Risk of a FALL, TIP-OVER or Loss of Control, At a Minimum

Models: 4 Trek 3

1 31
Download 31 pages 35.17 Kb
Page 14
Image 14

14

V I . G e n e r a l W a r n i n g s

S.TO REDUCE THE RISK OF A FALL, TIP-OVER OR LOSS OF CONTROL

1.Never use your scooter on a slope unless you are sure you can do so without losing traction.

2.Always go as straight up and as straight down as you can.

•Do not “cut the corner” on a slope or ramp.

•Do not turn or change direction on a slope.

3.Always stay in the center of the ramp. Make sure ramp is wide enough that you are not at risk that a wheel may roll off the side.

4.Lean or press your body uphill. This will help adjust for a change in the center of balance caused by the slope.

5.Keep your scooter moving at a slow, steady speed. Keep control over the scooter at all times.

•On a descent, do not let your scooter accelerate beyond its normal speed.

•If the scooter picks up speed, center the joystick to slow down or stop.

NOTE– The solid state controller of your scooter has a logic system that will help control your speed when driving on a slope or uphill.

•If you stop, re-start slowly.

T. RAMPS AT HOME & WORK

Make sure ramps meet all Building Codes for your area.

1.For your safety, have a licensed contractor build or remodel ramp to meet all standards.

2.NOTE– The proper design will vary, depending on such things as: the length and height of the ramp; the need for an intermediate platform; landing size; doors and the direction of swing; and whether the ramp includes a turn or angle.

At A Minimum:

1.Open sides of ramp must have side rails to prevent your scooter from going over the edge.

2.Slope must not be steeper than one inch in height for every one foot of slope length.

3.Ramp surface must be even, and have a non-skid surface.

4.You may need to add a section at the top or bottom to avoid a lip or drop-off.

5.Ramp must be sturdy. Add bracing if needed, so ramp does not “bow” when you ride on it.

U.WHEELCHAIR/SCOOTER LIFTS

Wheelchair/Scooter lifts are used in vans, buses, and buildings to help you move from one level to another.

1.Always turn off all power to your scooter when you are on a lift. If you fail to do so, you may touch the control pod by accident and cause your scooter to drive off the platform. (Be aware that a “roll-stop” at the end of the platform may not prevent this).

2.Make sure there is not a lip or drop-off at the top or bottom of the platform. These may cause a fall or tip-over. When in doubt, have someone help you.

3.Always secure the rider with a positioning belt to help prevent falls during transfers.

4.Avoid moving forward if a wheel is “hung up” on the lip of the ramp. Backup, reposi- tion the caster for a more direct approach and slowly try again.

930490 Rev. A

Page 13 Page 15
Page 14
Image 14
Sunrise Medical Trek 3, 4 To Reduce the Risk of a FALL, TIP-OVER or Loss of Control, Ramps AT Home & Work, At a Minimum
Page 13 Page 15

4, Trek 3 specifications

The Sunrise Medical Trek 3 and Trek 4 are innovative power wheelchairs designed to enhance mobility, comfort, and ease of use for individuals with varying mobility needs. These models reflect advanced engineering and thoughtful design, ensuring they meet the demands of everyday life while maintaining the utmost safety and convenience.

One of the standout features of the Trek series is its adaptability. The Trek 3 and Trek 4 come with customizable configurations to cater to different user preferences and requirements. Whether for indoor maneuverability or outdoor excursions, both models can be tailored with various seating systems, armrests, and footrests aimed at providing a personalized experience.

A key technology integrated into the Trek 3 and 4 is the Dynamic Suspension System, which contributes to a smooth ride over uneven terrain. This innovative system adjusts the wheelbase and suspensions to absorb shocks, ensuring comfort regardless of the environment. The Trek 4, in particular, boasts enhanced outdoor capabilities, seamlessly navigating rough surfaces while maintaining stability and control.

The Trek series also emphasizes ease of operation. Equipped with a user-friendly joystick controller, users have precise control over their mobility. The control system offers programmable features, allowing users to set different speed levels and sensitivity preferences, making it adaptable for users of all skill levels.

Additionally, both models are engineered with battery efficiency in mind. The power chairs utilize high-performance batteries that provide extended voyage time, allowing users to confidently travel longer distances without frequent recharging. The Trek 4, with its larger battery option, is particularly suited for outdoor adventures.

Safety is another crucial aspect of the Sunrise Medical Trek series. Each wheelchair comes with robust safety features, including anti-tip technology and secure braking systems, designed to prevent accidents and ensure user confidence while on the move.

In summary, the Sunrise Medical Trek 3 and Trek 4 combine advanced technology with user-centric design, making them an excellent choice for anyone seeking a reliable and versatile mobility solution. With their customizable features, dynamic suspension, and safety measures, these power wheelchairs are positioned to improve the quality of life for users, promoting independence and freedom in everyday activities.