SUPER MICRO Computer 6015B-U, 6015B-NTR, 6015b-RU Installing/removing hot-swap Sata drives

Chapter 6: Advanced Chassis Setup

2. Installing/removing hot-swap SATA drives

The SATA drive carriers are all easily accessible at the front of the chassis. These hard drives are hot-pluggable, meaning they can be removed and installed without powering down the system. To remove a carrier, push the release button located beside the drive LEDs. Then swing the colored handle fully out and use it to pull the unit straight out (see Figure 6-5).

Note: Your operating system must have RAID support to enable the hot-plug ca- pability of the SATA drives.

Figure 6-5. Removing a SATA Drive from the Server

6-7