JVC HR-A230EK specifications Installing Batteries, How To Use, Operating JVC TVs, Digit Entry

*OPERATE Button — same as button on recorder. ☞ pg. 5

( DISPLAY Button switches display between clock time and counter readings. ☞ pg. 16

) ADD TIME Button adds time to end of record-

ing (5 minutes each time button is pressed.)

☞pg. 20

qDAILY Button enables timer recording of daily serials. ☞ pg. 20

wWEEKLY Button enables timer recording of weekly serials. ☞ pg. 20

e AUX Button sets recorder's input mode.

☞pg. 24

rTIMER Button — same as button on recorder. ☞ pg. 20

tTV PROG. +/– Button selects preset. ☞ pg. 15

yDATE +/– Button inputs date of programme for timer recording. ☞ pg. 21

uTV/VCR Switch enables remote control of VCR or connected TV. ☞ "Operating JVC TVs" in the right column.

iTV/VIDEO Button switches control between TV and VCR. ☞ "Operating JVC TVs" in the right column.

oFast Forward [FF] Button — same as button on recorder. ☞ pg. 10

pPAUSE Button — same as button on recorder. ☞ pg. 11

QSTOP Button — same as button on recorder. ☞ pg. 10

WPROG CHECK Button accesses Program dis- plays (next program's information display appears each time button is pressed). ☞ pg. 23

EOK Button enters display selections. ☞ pg. 7 R TV VOL %Þ Button controls volume of con- nected TV. ☞ "Operating JVC TVs" in the right

column.

39

Installing Batteries

1Open the battery compartment cover.

2Insert 2 "R6"-size batteries (provided) in the correct directions.

3Replace the cover.

How To Use

The remote control can operate most of your video recorder's functions, as well as basic functions of JVC TV sets. See below.

●Point the remote control toward the sensor window.

●The maximum operating distance of the remote control is about 8 m.

NOTE:

If for some reason the remote control doesn't work properly, remove its batteries, wait a short time and then try again.

Operating JVC TVs

To operate your TV, set the TV/VCR switch to "TV". The OPERATE button, TV/VIDEO button, TV PROG. +/– buttons, TV VOL %Þbuttons and the MUTE button on the

remote control can all be used to operate the TV.
Use the NUMBER keys, and the DIGIT ENTRY (		)
button or the PUSH JOG%%button to select the TV's
preset.
The DIGIT ENTRY (	) button corresponds to the 1-digit/

2-digit entry switching button (often labelled -/--) on your TV's remote control. The PUSH JOG % button corresponds to the 10+ button, and the PUSH JOG %button corre- sponds to the 20+ button of your TV's remote control.

NOTE:

The way these buttons are used is determined by your TV. Use these buttons as instructed for your TV's remote control.