JVC HR-A230EK specifications Enter Preset Position, Engage RECORDER’S Timer Mode, Press TV PROG. +

22

TIMERRECORDING(cont.)

TIMER

q 6

7 SP/LP

	2	DAILY
1	2
		3
4	5	6

7 8 9 WEEKLY

0 TIMER 9

TV PROG. 6

7 SP/LP

1 3 OK 8

ENTER PRESET POSITION

6	Press TV PROG. +/–.
	Day	Month	Preset position
	-	-	-
	SP
	D	M
	SET TAPE SPEED
7 Press SP/LP (		) to set the tape speed.
	RETURN TO NORMAL
8	DISPLAY
	After confirming all information is correct, press OK
	and the normal display appears.

●Repeat steps 1–8for each additional programme.

ENGAGE RECORDER’S

TIMER MODE

9 Press TIMER.

To Timer-Record Weekly Or Daily Serials . . .

. . . anytime during steps 2 through 8, press WEEKLY (NUMBER key “9”) for weekly serials or DAILY (NUMBER key “8”) for daily serials (Monday – Friday). "W" or "D" appears on the front display panel.

NOTES:

●For safety, your recorder disables all other functions while in the Timer mode. If you want to use the recorder but its Timer mode is engaged, press TIMER and all other functions are operable. To re-engage the timer, press TIMER.

●You can programme this recorder to timer-record as many as 8 programmes. If you try to programme the recorder to record a ninth, "FULL" appears on the front display panel. To record the extra programme, you must first cancel any unnecessary programmes (☞ pg. 23).

●To timer-record a satellite broadcast through a satellite receiver connected to the AV2 IN connector on the back of the recorder, in step 6 above, select "AU2" for the preset position by pressing TV PROG. +/–. Before the selected programme begins, select the appropriate channel on the satellite receiver, then set the receiver's timer. If your satellite receiver doesn't have a timer, leave the unit's power switched on.