JVC HR-A230EK Override Automatic Tracking, Adjust Tracking, Manually, Return to Automatic

12

PLAYBACK (cont.)

Manual Tracking

q 6

TV PROG.

REVIEW

2

1 2 3

4 5 6

7 8 9

0

TV PROG.

SP/LP

3

1

Your video recorder is equipped with automatic tracking control. During playback, you can override this and adjust the tracking manually by pressing the TV PROG. buttons.

OVERRIDE AUTOMATIC

TRACKING

	Press SP/LP (	) on the remote to engage manual
1 tracking.
	ADJUST TRACKING
	MANUALLY
2 Press TV PROG. + or – to adjust tracking.
	RETURN TO AUTOMATIC
	TRACKING
	Press SP/LP (	) on the remote to re-engage auto-
3 matic tracking.

NOTE:

When a new tape is inserted, the recorder enters the automatic tracking mode automatically.

Instant ReView

Simply by pressing a single button, the recorder power comes on, rewinds, and begins playback of the last timer-recorded programme. If you have several programmes recorded, you can easily access any of them.

NOTE:

Before starting, make sure that the recorder is off and that the Timer mode is disengaged.

ACTIVATE INSTANT

REVIEW

1 Press REVIEW. The recorder power comes on and the recorder searches for the index code indicating the start of the last timer-recorded programme. Once it’s found, playback begins automatically.

The front display panel tells you how many programmes have been recorded. If you have, for example, 3 programmes, “REV 3” appears and blinks. To watch the first of the 3 programmes, press REVIEW three times. The recorder searches and begins playback automatically. You can access a programme as far as 9 index codes away from the current tape position.

NOTE:

●Instant ReView is not possible while the recorder is in the Timer mode.