28
USING THE CONFIRMATION DISPLAY (cont.)
12
45
3
6
8
0
79
1
3
2
q6
OK
Perform steps 1 and 2 on page 26 to access the Confirmation
display before continuing.
Set Stations (A)
SELECT ITEM1
Press PUSH JOG%fi until the item you want is
displayed. Then press OK twice and the station’s name
(or "– –") begins blinking.
SELECT NEW STATION2
Press PUSH JOG%fi until the new station’s name you
want to store begins blinking.
Registered station names (Z pg. 30) appear as you
press PUSH JOG%fi.
SWITCH STATIONS3
Press OK.
●Repeat steps 1 through 3 as necessary.
RETURN TO NORMAL
DISPLAY
4
Press CH SET.
NOTE:
First perform step 1 of the above procedure.
SELECT STATION NAMECHARACTER2
Press PUSH JOG and the first letter of the station
name (or "–") begins blinking.
ENTER NEW CHARACTER3
Press PUSH JOG%fi to cycle through the characters
(A–Z, 0–9, –, *, +, (space)) and stop when the
desired one is indicated, then press PUSH JOG to
enter. Enter the remaining characters the same way
(maximum of 4).
After entering all characters, press OK.
●Repeat steps 1 through 3 as necessary.
●If you make a mistake, press PUSH JOG until the
incorrect character begins blinking. Then enter the
correct character by pressing PUSH JOG%fi.
RETURN TO NORMAL
DISPLAY
4
Press CH SET.
Set Stations (B)
CH SET
%
]
%
%
PUSH JOG
%