JVC HR-A230EK Return to Normal Display, SET Date and Time, SET Just Clock, Preset Position

q 6

	2
1	2	3

	CLOCK	5	6
6	4
	7	8	9
		0

1	3	OK 3,4,
3,4, PUSH JOG		5
5

NOTES:

●Just Clock (when set to "ON") enables adjustment of the recorder's built-in clock every hour on the hour, except for 11 o'clock in the evening and midnight.

●Just Clock is not effective when . . .

–the recorder’s power is on (unless the recorder is tuned to the same preset selected in the Just Clock display).

–the recorder is in the Timer mode.

–a difference of more than 3 minutes exists between the built-in clock’s time and the actual time.

●If Just Clock is set to "ON", the recorder’s clock is automati- cally adjusted at the start/end of Summer Time.

●Auto clock setting and Just Clock may not function properly depending on the reception condition.

●During Manual clock setting, if the day and month data are invalid (such as 31st April), the month digits are cleared automatically and the day digits begin blinking. Input the correct data.

●If, in step 3 of the Manual clock setting procedure, the year digits are automatically cleared and the day digits begin blinking, it is possible that you have input 29th February for a non-leap year. Input the correct data.

9

RETURN TO NORMAL

DISPLAY

4 Once clock setting is completed, press CLOCK to return to the normal display.

Manual Clock Set

		SET DATE AND TIME
		Press PUSH JOG%Þ to set the hour, then press OK. The
	“minutes” display begins blinking. Repeat the proce-
3 dure to set the minutes, day, month and year.
		Hour	Minutes
	-		-
		Day Month			Year
	-		-		-
		D		M
	After inputting the year, press OK and the Just Clock
	display appears.
4		SET JUST CLOCK
		The default setting is “ON”. Set as desired by pressing
		PUSH JOG%Þ, then press OK.

		● If you set to “OFF”, you can disregard the next step as
		you won’t be able to receive regular clock adjustments.
		SET CLOCK DATA SOURCE
5		PRESET POSITION
		The recorder is preset to receive clock setting and
		adjustment data from preset position 1. Press PUSH
		JOG %Þ to set the preset position to the number
	representing the station transmitting clock setting data,
	then press OK.
		START CLOCK OPERATION
6 Press CLOCK.