AOC-SASLP-MV8 Add-on Card User’s Manual
3-4 Getting Firmware Downloads
Firmware for the
3-5 Flashing Firmware
Follow the procedure below to flash firmware to the BIOS.
Flashing Firmware:
1.Boot the system to DOS.
2.Flash the BIOS using the mvf.exe file with the following command at the DOS prompt (where *** represents the name of the bin file used):
a:\>mvf ***.bin
This automatically flashes the BIOS.
3.When the flashing is completed, reboot the system.
The new firmware is now flashed to your system’s BIOS.