Chapter 2: Installation
2-21GLAN2 Enable/Disable(*P4SCT+/P4SCT+ only)
Change the setting of jumper JPL2
to enable or disable the onboard
LAN on the motherboard. See the
table on the right for jumper set-
tings. The default setting is En-
abled. (For LAN1, please change
the setting in the BIOS.)
JumperPositionPins 1-2Pins 2-3DefinitionEnabledDisabled LANEnable/DisableJumper Settings(JPL2-*P4SCT+) Keyboard Wake-UpThe JPWAKE jumper is used to al-
low the system to be woken up by
depressing a key on the keyboard
from S1 or S3 in Windows OS.
See the table on the right for
jumper settings. Your power sup-
ply must meet ATX specification
2.01 or higher and supply 720 mA
of standby power to use this fea-
ture.
CPU478 PGAMCHPWR LED
COM2
USB 1/2
Parallel PortJPWAKE
WOR
OH FAN/CH Fan5
COM 1
VGA
GLAN 1
PCI 1-XPCI-X 2PCI -X 3PCI 2FLOPPYBATTERY
BIOS DIMM 0A (Blue)Watch Dog
FRONT PANEL CTRBANK0BANK1®JF1WOL
IRSuper I/OSpeaker
I-SATA LED
Keylock
USB 3/4
24-pin ATX PWRConn
S
UPER P4SCT/P4SCT+/P4SCT+IIGLAN 2
PCI 1 CHS FAN3Intel's SATA2
KB/MouseJPUSB
LAN2 Enable
RAGE-XL
+12V 4-pin PWR Conn.
PWR Froce On
(North Bridge) CHS FAN4
CPU SpeedCPU/CHFan1Intel's SATA1
SATA1/5 SATA3/7SATA4/8VGA Enable
AGP ProSMBus
SATA CTLR
GLAN CTLR
82541
CLR CMOS
HanceRapidsM-SATA1-2 Enable
MarvellSATA2/6IDE1IDE2Ch. Intru.
CHS FAN2(Marvall's SATA)Standby LED
LAN CTLR
82547
DIMM 1A (Blue) DIMM 0B (Black) DIMM 1B (Black)Speaker
M- SATA LED
PWR Force On
B. GLAN Enable
A. Keyboard Wake-UP Enable
Jumper
Position
1-2
2-3
Definition
VCC5V
Keyboard Wake-Up
J
umper Settings (JPWAKE
)
VCC5V
Standby
A
B