SBA-7142G-T4 Blade Module User’s Manual
4-2
4-1 Control Panel
Each blade has a similar control panel (Figure4-2 ) with power on/off button, a KVM
connector, a KVM button and four LEDs on the top front of the unit. The numbers
mentioned in Figure4-2 are described in Table 4-2.
Figure4-2. Blade Control Panel
Table4-2. Blade Control Panel
Item Function State Description
1 Power Button N/A Turns blade module on and off
2KVM Button N/A Initiates KVM function
3 Power LED Green Indicates power status “On”
Orange Indicates power status “Off” (with power cables plugged in)
4KVM/UID LED Blue Indicates KVM being utilized on blade unit
Flashing Blue Indicates UID activated on blade module
5 Network/IB LED Flashing Green Indicates network activity over LAN
Flashing Orange Indicates network activity over InfiniBand module
6System Fault
LED Red Indicates a memory error, overheat, VGA error or any error
that prevents booting
7 KVM Connector N/A Connector for SUV/KVM cable
1
5
4
3
6
7
2