Chapter 5: AMI BIOS
5-15
SXB1 PCI-E 2.0 x16/x8 Option ROM/SXB3 PCI-E 2.0 x8 Option ROM/SXB2
PCI-E 2.0 x8/x4 Option ROM/SXB2 PCI-E 2.0 x4 Option ROM
Select Enabled to enable PCI -E sl ots indic ated above. I t can als o enable O ptio n
ROMs specifi ed to boot computer using a network interface from these slots. The
options are Enabled and Disabled.
Onboard LAN Option ROM Select
Select iSCSI to use iSCSI Opt ion ROMs to b oot the co mputing usi ng a networ k
device. Select iSCSI to use PXE Opt ion ROMs to boot the c omputing using a
network device. The optio ns are iSC SI and PX E.
Load Onboard LAN1~LAN4 Option ROM
Select Enabled to enable the onb oar d L A N1, LA N2 , L A N 3 or L AN4 Option ROM.
This is to boot computer using a network interface. The options are Enabled and
Disabled.
Boot Graphics Adapter Priority
This feature allows the user to specify which graphics controller to be used as
the primary boot graphic s c ontro ller. The options are Onboard VGA, SXB1 PCIe
2.0 x16, and Offboard VGA .
Super IO Device Confi guration
Serial Port1 Address/ Serial Port2 Address
This option specifi es the base I/O port address and the Interrupt Request address
of Serial Port 1 and Serial Port 2. Select Disabled to prevent the serial port from
accessing any system resources. When this option is set to Disabled, the serial port
physically becomes unavailable. Select 3F8/IRQ4 to allow the serial port to use 3F8
as its I/O port address and IRQ 4 for the interrupt address. The options for Serial
Port1 are Disabled, 3F8/IRQ4, 3E8/IRQ4, 2E8/IRQ3, and 2F8/IRQ3. The options for
Serial Port2 are Disabled, 2F8/IRQ3, 3E8/IRQ4, 3F8/IRQ4, and 2E8/IRQ3.
Serial Port 2 Attribute
This feature allows the user to s et COM 2 as a normal serial por t or a virtual COM
port used for SOL (Serial O ver L AN). The options are SOL and COM.
Remote Access Confi guration Remote Access
This allows the user to enable the Remote Access feature. The options are Disabled
and Enabled. If Remote Access is set to Enabled, the following items will display: