SUPER MICRO Computer X8SIL-F, X8SIL-V user manual Installing a Passive CPU Heatsink

Chapter 2: Installation

1

2

3

4

Installing a Passive CPU Heatsink

Do not apply any thermal grease to the heatsink or the CPU die -- the required amount has already been applied.

Place the heatsink on top of the CPU so that the four mounting holes are aligned with those on the Motherboard's and the Heatsink Bracket under- neath.

Screw in two diagonal screws (i.e., the #1 and the #2 screws) until just snug (do not over-tighten the screws to avoid possible damage to the CPU.)

Finish the installation by fully tightening all four screws.

Recommended Supermicro heatsink:

SNK-P0046P heatsink with BKT-0028L

bottom bracket

Screw#1

Screw#2

Motherboard

Mounting

Holes

Heatsink Bracket

2-5