Superior DR500 manual Glowing Embers Rockwool Placement, Electronic Appliance Checkout

8

Glowing Embers (Rockwool) Placement

Refer to the detailed glowing embers place- ment instructions provided in the LOG PLACE- MENT GUIDE accompanying this document.

Decorative Volcanic Stone Placement - See Figures 7, 8 and 9 on page 7.

Spread this Decorative Volcanic Stone evenly over the bottom surface of the appliance fire- box bottom plate as desired to achieve an esthetically pleasing appearance. For best re- sults, spread in a non-uniform manner while ensuring complete coverage of the black sheet- metal surface.

Note: Do Not place decorative volcanic stone on top of the gas burner where it will block the burner ports.

SIT and Honeywell Millivolt Appliance Checkout

The pilot flame should be steady, not lifting or floating. Flame should be blue in color with traces of orange at the outer edge.

The top ³⁄₈" (10 mm) at the pilot generator (thermopile) and the top ¹⁄₈" min (tip) of the quick drop out thermocouple should be engulfed in the pilot flame. The flame should project 1" (25 mm) beyond the hood at all three ports (Figure 10 - SIT, Figure 11 - Honeywell ).

To light the burner, refer to the lighting in- structions on pages 11 and 12 for Honeywell and SIT millivolt gas valves).

SIT MILLIVOLT	Hood	Ignitor Rod
Thermocouple

³⁄₈" Min (9 mm)

Pilot Nozzels

Thermopile

Figure 10

MILLIVOLT HONEYWELL

	Thermocouple
¹⁄₈" Min	Ignitor Rod
	Hood
(3 mm)

³⁄₈" Min (9 mm)

Pilot

Nozzels

Thermopile

Figure 11

NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE.

Electronic Appliance Checkout

To light the burner, refer to the lighting instruc- tions on page 14 and 15. Ensure the ignitor lights the pilot. The pilot flame should engulf the flame sensor as shown in Figure 12.

ELECTRONIC

Proper Flame	3/8 To 1/2 Inch
	(9 mm to 13 mm)
Adjustment
Pilot
Nozzle	Ground
	Electrode
	Flame Rod
	Hot Surface
	Igniter

Figure 12

With proper care and maintenance, your ap- pliance will provide many years of enjoy- ment. If you should experience any problem, first refer to the trouble shooting guide in this manual. If problem persists, contact your Lennox distributor.