
Combustible Mantel and Trim Clearance
Model
Canopy is required on all installations for this model only.
|
|
|
| Safe Zone |
|
| ||
|
|
| Combustible Mantel |
| ||||
|
|
|
| and Trim |
|
| ||
| 18” |
|
|
|
|
|
|
|
| 17” |
|
|
|
|
|
|
|
| 16” |
|
|
|
|
|
|
|
| 15” |
|
|
|
| Coordinate | Combustible | |
|
|
|
|
|
| Material (wall) | ||
| 14” |
|
|
|
| in ()Example | ||
|
|
|
|
|
| |||
| 13” |
|
|
|
|
|
| |
| 12” |
|
|
|
|
|
|
|
| 11” |
|
|
|
|
|
| Header |
Example | 10” |
|
|
|
|
|
| Top Spacer |
|
|
|
|
|
| on Appliance | ||
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
| |
| 9” |
|
|
|
|
|
| |
|
|
|
|
|
|
|
| |
| 8” | 7“ | 6” | 5” | 4” | 3” |
| Material 3” Min. |
|
|
| ||||||
|
|
|
|
|
|
|
| Top of Appliance |
|
|
|
|
|
| Example |
| |
|
| Top of Firebox Opening | Canopy | Screen | ||||
|
|
|
|
|
|
|
|
EXAMPLE: If you choose to install a mantel that projects 5", you will need to install it so that the bottom of the mantel and trim is approximately 13" or more above Firebox opening (see coordinate in shaded area above).
Figure 4
Combustible Mantel and Trim Clearance
Models
Canopy is optional on these models
|
|
| Safe Zone |
|
| |
|
| Combustible Mantel |
| |||
|
|
| and Trim |
|
| |
| 16” |
|
|
|
|
|
| 15” |
|
|
|
| Combustible |
|
|
| Coordinate | Material (wall) | ||
|
|
|
| |||
| 14” |
| in ()Example |
| ||
| 13” |
|
|
|
| |
| 12” |
|
|
|
| Header |
| 11” |
|
|
|
| |
|
|
|
|
| Top Spacer | |
Example | 10” |
|
|
|
| |
|
|
|
| Material 3” Min. | ||
|
|
|
|
| on Appliance | |
|
|
| 3” |
| ||
| 6” | 5” | 4” | 2” |
| |
|
|
|
|
|
| Top of Appliance |
|
|
| Example |
|
| |
Top of Firebox Opening | Canopy | Screen | ||||
|
| |||||
|
|
|
|
|
|
EXAMPLE: If you choose to install a mantel that projects 4", you will need to install it so that the bottom of the mantel and trim is approximately 13" or more above Firebox opening (see coordinate in shaded area above).
Figure 5
Combustible Mantel and Trim Clearance
Models
Canopy is optional on these models
|
|
|
|
| Safe Zone |
|
|
|
|
| Combustible Mantel |
| |
|
|
|
|
| and Trim |
|
| 24” |
|
|
|
|
|
| 23” |
|
|
|
|
|
| 22” |
|
|
|
|
|
| 21” |
|
|
|
| Combustible |
|
|
|
|
|
| |
| 20” |
|
|
| Coordinate | Material (wall) |
|
|
|
|
| ||
| 19” |
|
| in ()Example |
| |
|
|
|
|
| ||
| 18” |
|
|
|
|
|
| 17” |
|
|
|
| Header |
Example | 16” |
|
|
|
| Top Spacer |
|
|
|
|
| Material 3” Min. | |
| 10” | 9” | 8” | 7” | 6” | on Appliance |
| ||||||
|
|
|
|
|
| |
|
|
|
|
| Example | Top of Appliance |
|
|
|
|
|
| |
|
|
| Top of Firebox Opening | Screen | ||
|
|
|
|
|
|
EXAMPLE: If you choose to install a mantel that projects 7", you will need to install it so that the bottom of the mantel and trim is approximately 19" or more above Firebox opening (see coordinate in shaded area above).
Figure 6
Noncombustible material (minimum requirements) with wood mantel or other combustible projections: To install the firebox with a wood mantel, shelf or other combustible projection above firebox opening. Refer to
Figures 4, 5 & 6.
WARNING
The canopy must be in place to be in compliance with the clearances specified in Figures 4 & 5. Do not remove or replace canopy, only use canopy supplied or offered for these fireboxes (see Pages 16 & 17). Do not use any canopy which may be provided with the decorative type
If your mantel profile is unsafe, you may either:
•Raise the mantel to an acceptable height, or
•Remove the mantel.
Floor clearance: These fireplaces may sit directly on a combustible surface. The appliance should be mounted on a fully supported base extending the full width and depth of the unit. The appliance may be located on or near conventional construction materials. However,
if installed on combustible materials, such as carpeting, vinyl tile, etc., a metal or wood barrier covering the entire bottom surface must be used.
NOTE: DIAGRAMS & ILLUSTRATION ARE NOT TO SCALE. | 7 |