4.3. TIMER SETTINGS [TIMER D]
In this mode you can set the countdown time for the downtimer. The downtimer also has an alarm repeat function for continuous downtimer alarm.
To set the downtimer:
1.In the Setting Mode, press S three (3) times to select the Timer Setting Mode (Fig. 4.8.)
2.Wait two seconds until the Timer Setting Mode activates automatically. The SET mode and DT seg- ments are displayed.
3.Press S to change the selection in the following sequence:
When the minutes and seconds are selected (blink- ing), press - to decrease and + to increase the value.
4.After the downtimer time selection, the downtimer alarm repeat is selected. The alarm repeat function begins a new countdown after the previous one and signals every time when the downtimer begins a new countdown.
C | ON |
A | |
S |
|
Fig. 4.8. Timer Setting Mode.
C | ON |
A | |
S |
|
Fig. 4.9. Downtimer time and alarm repeat are selected.
41
