![Manual background](/images/new-backgrounds/23838/2383813x1.webp)
Chapter 5.2 | SV Sound |
|
|
Sometimes, with very low listening levels, your subwoofer might not get enough of a bass signal from your AVR to “trip” the
Crossover Feature Switches. If you allow your DD/DTS surround- sound receiver or processor to manage bass frequencies (again, highly recommended), this switch should be set to “Disabled”, elimi- nating the effects of the “Crossover Frequency” knob and allowing your sub to reproduce just what is fed from the receiver. If you use the sub in a two channel (stereo only) configuration, then “Enable” the crossover and adjust the knob to best blend the sub into the out- put of your speakers.
Power. This
Fuse. User replaceable, contact your dealer if you have trouble find- ing one. The fuse can be accessed by a small door immediately next to the power cord fitting
(where you should also find a spare one for your use).
Read ahead for advanced features including Variable Tuning and Parametric Equalization (PEQ).