SVAT ELECTRONICS now you can see
4.While continuing to hold these pieces
securely, insert side for bolt 
(including bolt) into the center and other side piece as shown above.
7.If needed, loosen the mounting plate knob by turning it counter- clockwise. Slide the mounting plate into the monitor’s mounting rail as shown.
5.While holding the adjustment head as shown, thread the wing nut onto the bolt by turning the wing nut clockwise.
8.Secure the mounting plate to the monitor by turning the mounting plate knob clockwise.
6.If you need to adjust the mounting plate or adjustment head, loosen the wing nut slightly, adjust, and retighten.
OPTION 1: CONNECTING TO SECURITY CAMERAS
1. Plug the 3.5mm to RCA (female) cable adapter into the AV1/IN port on the monitor. Plug the cable adapter into the headphone output.
2. Plug the camera’s RCA output plug into the video input (yellow) end of the 3.5mm to RCA (female) cable adapter.
3. Repeat steps 1 and 2 for connecting a second camera to the AV2/IN port on the monitor.
CLEARVU7 | 4 |
