WebCAM user manual -45-
Chapter 5: Web Manager
”System Name”
This is to give WebCAM a name identifiable in a SNMP network.
“System Contact”
This is to give the administrator a name.
“System Location”
This is to set WebCAM location.
“Manager IP Address”
This set the IP address where the administrator can manage WebCAM from. It
is valid for up to 8 IP addresses. To manage WebCAM from any IP addresses
leave it as *.*.*.*.
“Community”
This is to set a Community name for NMS. The community name has to be the
same as that set in NMS.
“Permission”
This is to set the administrator’s authority. Options are Read, Read/Write, and No
Access.
“Description”
This is for an administrator to make notes.
The Image Server allows the user to view his camera directly from the internet without
having to set-up DDNS or Router’s NAT. All the user has to do is log on to the
Server’s webpage and register for free.
Once a username and password is registered and confirmed. The user can log into
this Server from anywhere in the world and access his camera.