WebCAM user manual -81-
Appendix A: Router Configuration
Proxim (http://www.proxim.com)
ORiNOCO BG-2000 Broadband Gateway
1. Log into your router using your router IP.
2. On the router’s main page, click on Setup at the top of the page.
3. On the left side of the page, click on Advanced settings -> Port Forwarding.
4. Check in the checkbox for Enable Port Forwarding.
5. Click New on the right side of the page.
6. Enter the following information on the page:
Global Port: 80
Local Address: Type in the camera’s IP address, for example:
192.168.0.5
Local Port: 80
Type: TCP
7. Click Save to save the settings.
8. Click New on the right side of the page.
9. Enter the following information on the page.
Global Port: 9001
Local Address: Type in the camera’s IP address, for example:
192.168.0.5
Local Port: 9001
Type: UDP
10. Click Save to save the settings.
11. Click Restart on the left side of the page to restart your router. WebCAM should
now be configured to work with your router and be accessible from the internet.