SVAT Electronics Q1204 instruction manual FIG-1, Installation, Wiring Diagram

INSTALLATION

CAUTION: Before connecting the power and switching the unit ON make sure all wiring is connected properly.

1.Connect the power adapter (supplied) to the back of the monitor.

2.Using the DIN cable connect the four cameras to the back of the monitor. Both ends of the cable

are the same and will fit in both the camera and the monitor. Align the pins on the connection jack, do not force the plug in, it should go in freely. (FIG-1)

4.When using only 1-2-3 cameras the empty channel will remain grey.

5.Using a standard RCA Cable (not supplied) you can connect the monitor to an extra monitor/vcr or add additional cameras (use the BNC adapters provided to convert the BNC slots to RCA)

WARNING: When using BNC camera input jacks do not connect another camera to the same channel using a DIN connection. There is only one camera allowed per channel.

WIRING DIAGRAM

(FIG-1)

5

w w w . s v a t . c o m