GENERAL SETUP
1.Connect the power jack of adapter (DC 8V) to camera.
2.Turn on the monitor. Make sure that the active channel on the monitor is the same that is on the camera. Wait for the LCD screen to display images.
3.Adjust the volume control to preferred setting.
BATTERY INSTALL
4.The monitor should be turned off. Open the battery compartment in the back of the monitor. Install the rechargeable ion lithium battery for portability purposes.
AC POWERED/RECHARGING
5.You can connect the adapter (DC +5V) to power on receiver and charge up the battery at the same time. The indicator will light while charging and turn off when the charging is complete.
MONITOR TO VIDEO FUNCTION
6.The monitor has one video output which can be used to connect to a VCR for recording. Connect the video output wire to the output on the monitor. Connect the yellow RCA end of the wire to your VCR’s yellow input
connection.
NOTE: In order to view and record the images from the WSE300, you must have the VCR on it’s input channel (not channel 3). Other names for the input channel are line
1/2, AV channel, TV/Video channel and AUX channel.
6
1
2
3
4
5
w w w . s v a t . c o m
