Swann ADW-300 warranty Troubleshooting, Hints & Tips, Important Safety Precautions

Models: ADW-300

1 6
Download 6 pages 23.97 Kb
Page 3
Image 3

Troubleshooting, Hints & Tips

Before requesting service, please make the below checks. If you are in doubt about some of the check points, or if the remedies indicated in the chart do not solve the problem, please contact us.

Problem

Possible Causes

Remedies

System message

No power supply to

First identify the channel number, find

shows ”NO

corresponding camera(s)

find the corresponding camera. If camera

Connection”

 

power status indicator (RED LED) is off,

 

 

check power adapter and power cable

 

 

connection.

 

Channel is not paired with

First identify camera has no image, draw

 

camera yet

the camera near the receiver then pair

 

 

the camera to desired channel. See page

 

 

11 for detail. Once pairing completed

 

 

and camera is picked up by the receiver,

 

 

camera status indicator (GREEN LED)

Important Safety Precautions

Please read before installing and using this Product. Damage caused by non-compliance with this operating manual will void the warranty. We will not assume any liability for damages to items or persons caused by improper handling or non-compliance with the safety notices. Any warranty claim will be null and void in such cases.

1.Do not drop, puncture or disassemble the camera or receiver; otherwise the warranty will be voided.

2.Keep adapters away from moisture.

3.Never tug on the power cords. Use the plug to unplug it from the wall outlet.

4.Do not expose the camera or receiver to extreme high temperatures or aim the lens in direct sunlight. Doing so may damage the camera.

5.Use the devices with care. Avoid pressing hard on the camera or receiver body.

6.For your own safety, avoid using the camera or power off the camera when there is a storm or lightning.

7.Remove the power adapter during long periods between usages.

8.Use only the accessories and power adapterssupplied by the manufacturer.

9.To meet the regulations pertaining to parental responsibility, keep the devices out of the reach of infants.

10.Check power cables do not get crushed or damaged by sharp edges whenever the devices are in operation.

 

will light up.

Service out of range

Draw the camera near the receiver

Signal been blocked

If possible, remove major obstacles

 

between the camera and the receiver. Or

 

relocate the camera to proper location.

Camera antenna

Secure camera antenna to camera body

connection loss

tightly.

FCC Compliance Statement:

This device complies with Part 15 of the FCC Rules. Operation is subjected to the following two conditions:

(1)this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation.

Products with CE Marking comply with EMC Directive (2004/108/EC); Low Voltage Directive (73/23/EEC); R&TTE(1999/5/EC) issued by the Commission of the European Community. Compliance with these directives implies conformity to the following European Norms:

EMC: EN 301 489

LVD: EN 60950

Radio: EN 300 328

Low signal or

Antenna directional

Adjust camera antenna and receiver

unstable signal

limitation

position.

 

Signal being blocked

If possible, remove major obstacles

 

 

between camera and receiver. Or relocate

 

 

the camera to proper location.

 

Strong radio signal near

Keep WIFI router away from the camera

 

by

and/or receiver.

 

Strong electromagnetic

Keep working motors (hair dryer/heat fan/

 

interference nearby

air conditioner/water pump) or microwave

 

 

oven away from the camera and/or

 

 

receiver.

Channel(s)

Scan channel(s) been set

Go to menu; enable the channel(s). See

disappear during

OFF

page 10 for detail.

auto or manual

 

 

scan

 

 

 

 

 

Dim/over-bright

Low light vision distance

Ideal low light vision distance is from 9 ft

image at night

too short/too far

/ 3m to 24 ft / 8 m. Adjust the camera to

time

 

have camera view fit in this distance.

FCC/CE WARNING

This equipment has been tested and found to comply with limits for a Class B digital device, pursuant to Part 15 of the FCC rules and ETSI (EN) 300 328. These limits are designed to provide reasonable protection against harmful interference in residential installations. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause interference to radio or television equipment reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Move the equipment away from the receiver.

-Plug the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/television technician for additional suggestions.

You are cautioned that any change or modifications to the equipment not expressly approved by the party responsible for compliance could void Your authority to operate such equipment.

Disposal

If the camera system no longer functions or can no longer be repaired, it must be disposed of according to the valid statutory regulations. Disposal of spent batteries / accumulators:

You are required by law (Battery Ordinance) to return all spent batteries and accumulators. Disposing of spent batteries/accumulators with common household waste is prohibited! Batteries/accumulators that contain hazardous substances are marked with the symbols on the side. These symbols indicate that it is prohibited to dispose of these batteries/ accumulators in the household waste.

The abbreviations for the respective heavy metals are: Cd= cadmium, Hg= mercury, Pb= lead. You can return spent batteries and accumulators that can no longer be charged to the designated collection points in your community, outlets or wherever batteries or accumulators are sold. Following these instructions will allow you to fulfil the legal requirements and contribute to the protection of our environment!

10

3

Page 3
Image 3
Swann ADW-300 warranty Troubleshooting, Hints & Tips, Important Safety Precautions

ADW-300 specifications

The Swann ADW-300 is a state-of-the-art outdoor security camera designed to offer comprehensive surveillance and peace of mind for both residential and commercial properties. Recognized for its reliability and cutting-edge technology, the ADW-300 integrates advanced features that cater to a wide range of security needs.

One of the key characteristics of the ADW-300 is its high-definition video quality. Capable of capturing footage in 1080p resolution, the camera ensures that every detail is crystal clear. This quality is particularly beneficial for identifying faces, license plates, and other critical details in varied lighting conditions. The night vision capabilities further enhance its functionality, utilizing infrared technology to provide clear visuals even in complete darkness, making it an ideal choice for 24/7 surveillance.

The ADW-300 is engineered with robust weatherproof housing, designed to withstand harsh outdoor conditions. This means whether it's raining, snowing, or exposed to extreme temperatures, the camera maintains its performance, ensuring reliability throughout the year. Its durable construction highlights Swann’s commitment to quality and longevity in outdoor security.

Incorporating advanced motion detection technology, the ADW-300 features customizable motion zones and sensitivity settings. This allows users to tailor alerts to specific areas of interest, reducing false alarms triggered by pets or passing cars. Furthermore, users receive instant notifications sent directly to their smartphones, ensuring greater responsiveness to potential threats.

The camera is equipped with two-way audio capabilities, allowing for real-time communication. This is particularly useful for monitoring entry points or for communicating with visitors at the property, enhancing the security experience.

The ADW-300 also offers flexible storage options. Users can opt for local storage using a microSD card or utilize cloud storage for additional backup, ensuring footage remains accessible when needed. Swann’s dedicated app provides an intuitive interface for managing settings, reviewing recorded footage, and receiving alerts, ensuring effortless control over your security system.

In summary, the Swann ADW-300 combines high-definition video quality, night vision, customizable motion detection, and weatherproof durability to offer a comprehensive outdoor surveillance solution. Its compatibility with modern technology and user-friendly features make it a robust choice for anyone looking to enhance their property's security.