Mounting the camera on your wall or ceiling

1.Once you have chosen the best position for the camera, switch the power to the camera off, and unplug the power lead from the camera.

2.When mounting the bulletcam camera to your ceiling or wall, please ensure that you rotate the camera so that at the top of the camera lens is 'up', otherwise you will find that your pictures are displayed upside down. (see diagram)

3.Hold the camera base in the position you wish to fix it, and mark the holes with an appropriate pen or pencil. Once this is done, remove the stand and drill a hole with the appropriate drill bit for the material you are mounting your camera to and the screws you are using. When your holes are done, screw the stand to the wall, then re-align the camera to the subject.

4.Run the camera cable back to the TV/VCR, any holes that you drill need to be at least 14mm in diameter to allow the connectors to pass through.

5.Reconnect the power and A/V leads to the camera and switch the camera power back on.

4

Things to consider when operating the bulletcam camera

1.To extend the operating distance of the camera from your TV or VCR you will need to purchase an A/V extension Cable (sold separately) which are available at most electronics stores.

Swann 18m/60ft AV powercable SW-AV-CABLE Swann 36m/120ft AV powercable SW-P-36M

2.The camera must not be placed where it looks directly into the sun or any other bright light source, as this will not only result in a poor image, but will eventually damage the electronics of the camera.

3.Areas with a high degree of contrast in the light levels may require re-positioning of the camera in order to obtain the best image.

4.The best viewing angle is achieved by placing the camera in a position where it is looking down on the subject.

5.IMPORTANT: For night-time use or when situated in a dimly-lit environment the camera requires the aid of suitable exterior lighting to ensure a good picture is achieved.

6.It is recommended that if night vision is required when using the BulletCam, you would use a movement activated sensor flood light to accompany your camera and provide a suitable light source. The best method is to mount the light behind the camera to ensure that the subject is correctly lit, and that the camera does not get too much light into the lens which may cause over-exposure problems. Lights of this type are readily available at hardware stores and similar electrical supply outlets. Consult your local electrical contractor for information on the installation requirements for the various types of flood lights.

5

Page 3 Page 4
Page 4
Image 4
Swann BulletCam Mounting the camera on your wall or ceiling, Things to consider when operating the bulletcam camera
Page 3 Page 4

BulletCam specifications

The Swann BulletCam is a cutting-edge surveillance camera that combines advanced technology with ease of use, making it a top choice for both residential and commercial security. With its sleek and robust design, the BulletCam offers exceptional performance in various weather conditions, ensuring reliable monitoring around the clock.

One of the standout features of the Swann BulletCam is its high-resolution video capture. It typically supports 1080p full HD video, providing crisp and clear images that enhance visibility and detail, even in low-light situations. This capability is crucial for identifying faces, vehicle license plates, and other crucial details that may be needed for incident documentation.

Equipped with powerful night vision technology, the BulletCam allows users to monitor their property in complete darkness. The infrared LED lights activate automatically in low-light conditions, giving it the ability to capture clear footage up to 30 meters away at night. This ensures continuous surveillance, allowing users to feel secure at any hour.

The camera features a durable, weather-resistant construction, making it suitable for both indoor and outdoor use. Its IP66 rating means it can withstand dust and direct water exposure, making it an ideal option for various environmental conditions. Whether mounted under an eave or wall-mounted, the BulletCam is designed to endure the elements.

Swann's proprietary technology includes smart features like motion detection and alerts. Users can customize motion zones to receive notifications only for the movements that matter. This helps reducefalse alarms and ensures that users remain informed when real activity occurs. Additionally, the camera can integrate with Swann's mobile app, allowing users to view live feeds, manage settings, and receive alerts directly on their smartphones.

The installation process is straightforward, allowing users to set the camera up themselves without the need for specialized skills. With a versatile mounting bracket, the BulletCam can be adjusted for optimal viewing angles.

Overall, the Swann BulletCam is an excellent choice for those seeking a reliable and feature-rich surveillance solution. Its combination of high-definition video, night vision capabilities, weather resistance, and intelligent features makes it a comprehensive tool for ensuring peace of mind and security in any environment.
Top Page Image Contents