Connecting Wiring

To attach the wiring correctly:

Attach wires to terminals 1-4 on the rear of the indoor Unit by sliding the U-shaped connection under the screw terminals.

Screw into place, being careful not to overtighten.

Attach a control for an electric lock/door-strike to terminals 5 & 6 and controls for an electric gate to terminals 7 & 8 (if applicable).

Attach the bare wire ends into the connections to connections 1-4 on the outdoor Unit using a small screwdriver or a pen (or similar) to push in the small button atop each wire terminal, and insert the wire.

Release the button and the wire will be clamped firmly in place.

Remember: The small U-shaped connection attaches to the indoor unit, whilst the plain wire end attaches to the outdoor unit.

Suggested wiring solution:

No.

Color

Function

1

Green

Audio

2

Black

Ground

3

Blue

Video

4

Brown

Power

Suggested solution only. All four wires in the cable are identical in every respect except their color. Thus, provided terminal 1 on the indoor Unit is connected to 1 on the outdoor Unit, and so forth, the color of the wire used is not particularly important.

7