Device Management & HDD Menu
This is the DEVICE MANAGEMENT menu. Here you’ll find options to customise and configure settings for:
• Your Hard Drive
• Alarm Settings
• PTZ (Pan, Tilt, Zoom) Devices
• Access from Mobile Devices
• Motion Detection
HDD
For accessing information about your hard drive. This is where you go to correct or analyze any problem with your hard drive. Additionally, you’ll be able to see at a glance how much recording time you have left at your current quality settings, as well as being able to format (erase all data from) the hard drive here. You can format flash drives from this screen as well.
Alarm
For configuring the DVR’s internal buzzer and
PTZ
The setup window for configuring the DVR to act as a PTZ (Pan, Tilt, Zoom) controller. Recommended for advanced users.
Mobile
For configuring the DVR to interface with mobile devices (mobile devices running Microsoft Windows Mobile®, Android, Symbian S60 (3rd or 5th edition) or iPhoneOS).
Motion
For setting up the motion detection features of the DVR. We suggest that motion detection is, under most circumstances, the most practical recording method for the DVR to employ.
This is the HARD DRIVE (HDD)
MANAGEMENT screen. All aspects of the hard drive can be managed from this screen. Additionally, this is the place to go if you want to know exactly how much space is left on the hard drive, and how much footage you can record to it.
Pictured with OVERWRITE being selected.
HDD STATUS: If the hard drive is not installed properly you will see a message saying NO DISK FOUND. The live view screen will display the 
icon on the bottom of Channel 1’s display if the hard drive is not being detected.
TOTAL SPACE: Total size of the hard drive currently installed.
FREE SPACE: Total amount of freespace available on the hard drive(s) currently installed.
USEABLE REC. TIME: Free space currently available in hours, calculated based on your current record quality settings.
22Remember: After making changes to the settings press/click the APPLY button.