Layout of Remote Control

1)0 ~ 9 (Numeric Buttons): Used to input numbers. 1 ~ 4 can be used as quick channel changing buttons in a similar manner to a television, and these will work during either live-viewing mode or playback. Additionally, the numeric buttons will be used when inputting any numerical information – most often, your password.

2)ALL: Activates or deactivates the entire area shown on screen to be armed for Motion Detection recording mode. Motion Detection will need to be correctly configured for this button to function as described.

3, 7, 8, 9 & 10) Arrow Buttons: Moves the cursor in the appropriate direction when navigating menus.

5)Record: Press to immediately start recording. This acts as a manual override to the schedule and motion recording modes. For a channel to be recorded in this mode (or any other) it must listed as ‘active’ in the Camera Setup and Record Setup menus.

6)Menu: One of the primary controls for navigating through the menus. When in live- viewing mode, it will enter the main menu. When pressed in the main menu, it will return the DVR to live-viewing mode. Finally, when in a submenu, this button will return you to the main menu.

7)SEL (Select): The equivalent of Enter/Return on a computer keyboard. Use this button to (as the name suggests) select an option in the menus, or to confirm an entry.

11)Mute: Will not affect the function of this DVR in live viewing mode. Toggles the audio on or off during playback.

12)Play: If pressed in live-viewing mode, this will take you directly into playback mode, and begin playing the most recent recording. In playback mode, use it to resume playback after pausing or stopping a recording.

4)Rewind: During playback, this will reverse the footage. Press multiple times to increase the speed of the reversing.

13)Fast-Forward:During playback, this will increase the speed of playback. Press multiple times to increase the speed of playback further.

14)Stop: In playback mode, pressing this button will stop playback.

15)Pause: During playback, will pause the current recording and leave a still-frame on screen. In live-viewing mode, this will activate the auto- sequence mode, where the display automatically cycles through the available camera signals (this must be correctly configured and enabled to function correctly).

1

 

 

2

6

7

3

8

10

9

 

11

4

12

13

5

14

15

 

 

8