Index
| Introduction | 2 |
| MicroCam III comes with... | 2 |
| Installing MicroCam III | 3 |
| Receiver Features | 4 |
| Camera Features | 4 |
| Important Information about this product | 5 |
| Troubleshooting, Hints & Tips | 6 |
| Technical Specifications | 7 |
| Help Desk / Support Details | Back Cover |
| Warranty Information | Back Cover |
Technical Specifications
MicroCam III CMOS Colour Camera
Sensor: | 1/3”(8.5mm) Colour CMOS |
Horizontal Resolution: | 380 TV lines |
Auto Electronic Exposure: | 1/60 - 1/15000 sec. |
Minimum Illumination: | 3 Lux@ f1.2 |
Signal to Noise Ratio: | >48dB |
Board Lens: | 7/32” ~ 5.6mm |
View Angle: | 60 degrees |
Size: | 5/8 x 23/32” ~16mm x 18mm, board lens |
Video System: | PAL 50Hz (Australia, UK/Europe), NTSC 60Hz (USA and Canada) |
Automatic Exposure / Gain / White balance.
Introduction
The Swann MicroCam III incorporates the latest in advanced technology. We feel confident that you will be pleased with the quality and features of this product.
The Swann MicroCam III allows you to transmit pictures with ease. As the radio waves it uses have a frequency of 2.4GHz, they can be received within a radius of up to 328ft/100m in open line of sight. The MicroCam III comes with 2 power sources (9V battery adaptor and mains adaptor) so that you have the option of using different power methods for different locations and conditions, to ensure that you have the best options for your situation.
MicroCam III 2.4GHz Transmitter
Fixed Channel: | 2450MHz Frequency band |
RF Output Power: | CE, FCC and |
Operating Power: | 8V DC |
Power Consumption: | 100mA |
Size: | 7/8” x 7/8” x 1” / 22 x 22 x 25 mm |
Antenna: | |
Transmitting Range: | Up to 328ft / 100M line of sight |
Weight: | 3/4oz / 20 grams |
Operating Temperature: | 32° ~ 122°F / 0° ~ 50°C |
MicroCam III 2.4GHz Receiver
Frequency: | 4 Channels in 2.4 GHz |
| frequency band* |
Video input/output: | 1V |
Audio input / output: | |
Antenna: | 50ohm SMA |
Operating Power: | 8V DC |
Power Consumption: | 150mA |
Size: | 3½” x 2¾” x 5/8” |
| 89 x 70 x 15mm |
Please note: The Swann MicroCam III broadcasts video in the public domain. The video signal is not encrypted and could potentially be viewed by anyone with a similar 2.4GHz receiver unit. Please keep this in mind when positioning and using any wireless camera equipment.
MicroCam III comes with ...
•1 x MicroCam III Miniature Color Camera / 2.4GHz Transmitter•1 x MicroCam III 2.4GHz Receiver•1 x Antenna for MicroCam III 2.4GHz Receiver•1 x 9v Battery Snap for Transmitter/Camera (battery not included)•2 x Mains Power Adaptor (8V for use with MicroCam III and Receiver)•A/V socket to RCA adapter Cable•Metal Camera stand•This Instruction SheetIf any of these items are missing, please contact your retailer.FCC NOTICE
This device complies with Part 15 of FCC Rules.
Operation is subject to the following conditions:
(1)This device may not cause harmful interference, and
(2)this device must accept any interference received, including interference that may cause undesired operation
2
FCC Notice
We, Swann Communications of 10612 Shoemaker Avenue, Bldg A, Santa Fe Springs, CA 90670 USA, declare under our sole responsibility that the product:
To which this declaration relates:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communication. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help.
CE Notice
This product complies with standards including Low Voltage Device Directive 73/23/EEC; EMC Directive 89/336/EEC and R&TTE Directive 1999/5/EC. It passed the subject tests by the authority concerned and is authorized to bear CE mark.
7