OPERATING INSTRUCTIONS

OSRAM

8/12/00

SYLVANIA

 

Process Heat

!BURN/FIRE/EXPLOSION HAZARD Do not use with or near explosive or reactive gases. Avoid contact with the side, or exposure to the exit-end, during or soon after operation. DO NOT USE NEAR VOLATILE OR COMBUSTIBLE MATERIALS.

Precautions

!Use filtered air. Avoid dust, dirt, grease, oil, or oil vapors, corrosive or reactive gases which will damage heater.

!Do not open the top cover of the control box. The control box is calibrated at the factory and must not be tampered with for any reason.

!Do not exceed rated pressure of 2 PSI. Higher pressures cause air leakage and will cause heater failure. For compressed air sources, control airflow with a pressure regulator. For blower air sources, control airflow with the damper on the heater box.

!Do not exceed rated supply voltage (120, 240V depending on model). Excess voltage may cause controller damage or failure.

!NOTE: The heater may be installed in any position when used with continuous gas flow. However, with interrupted or pulsed airflow, and the heater is vertically mounted (pointing downward), the inlet air sensors may be activated and turn heater power off. This occurs due to the natural rising of heat from the barrel to the control box. This results in delayed start-up (2 minutes or more), and mounting in this manner is not recommended.

Installation

"Securely mount the heater to prevent movement.

"Connect the filtered air source to the heater.

"Remove the wiring box cover (two screws).

"Connect the WHITE wire to one POWER lead.

"Connect the BLACK wire to the other POWER lead.

"Connect the GREEN wire to GROUND.

"Tighten the cord clamp and replace the wiring box cover.

Start-up

"Turn on air supply and adjust to desired flow/pressure.

"Set the red knob to one (1).

"Switch on power to the heater.

"Adjust the red temperature control knob upward for desired temperature.

Performance Curves

The following curve shows maximum temperature vs. flow rate for the G-TEMP heaters. Temperature measurements were made with an exposed-junction type “K” thermocouple located 1” from the heater exit. Use of other temperature measuring devices, or different thermocouple positions will generate different results.

131 Portsmouth Ave. Exeter, NH 03833 USA Tel: 800-258-8290 Fax: 603-772-1072

2

Page 1 Page 3
Page 2
Image 2
Sylvania 065253, 070282, 066136 specifications Precautions, Installation, Start-up, Performance Curves
Page 1 Page 3

065253, 066136, 070282 specifications

Sylvania has a long-standing reputation for producing high-quality lighting solutions, and their product line includes a variety of versatile and efficient offerings. Among their extensive catalog, the Sylvania 066136, 070282, and 065253 models stand out due to their innovative technologies and remarkable characteristics.

The Sylvania 066136 is designed primarily for providing vibrant illumination in a wide range of applications. It features LED technology that not only enhances brightness but also assures long-lasting performance. With an impressive lifespan of up to 25,000 hours, users can count on substantial energy savings compared to traditional incandescent bulbs. This model emits a warm white light with a high color rendering index (CRI), making it ideal for residential and commercial settings where color accuracy is crucial.

On the other hand, the Sylvania 070282 takes functionality a step further. This model is engineered for outdoor use, providing robust weather-resistant capabilities. It incorporates advanced technology that ensures optimal performance even in challenging environments. With its durable housing and superior thermal management, the 070282 is perfect for applications such as street lighting and landscape illumination. It also boasts a high lumen output, ensuring safety and visibility in various settings.

Lastly, the Sylvania 065253 model is tailored for commercial applications, particularly in high-ceiling environments. This model offers exceptional light distribution and efficiency, making it suitable for warehouses, gyms, and large retail spaces. Featuring state-of-the-art LED technology, the 065253 provides a significant reduction in energy costs while delivering consistent, bright lighting. Its sleek design allows for easy installation in an array of settings, complementing both modern and traditional architecture.

In summary, the Sylvania 066136, 070282, and 065253 models each offer unique features that cater to different needs and applications. With their advanced LED technologies, extended lifespans, and energy efficiency, these models exemplify Sylvania's commitment to quality and innovation in lighting solutions. Whether for indoor, outdoor, or commercial usage, these lighting options promise reliability and exceptional performance.
Top Page Image Contents