3Begin OTR
OTR(2 : 30)
Press the REC/OTR button on the TV/VCR as many times as needed. The recording length will be deter- mined by the number of times you
SP
press the REC/OTR button. Each
additional push will increase the recording time by 30 minutes. It is set up to 8 hours.
Push(es) | Display |
| Recording length |
1 push |
| (normal recording) | |
2 pushes | 0:30 |
| 30 minutes |
3 pushes | 1:00 |
| 60 minutes |
|
|
|
|
17 pushes | 8:00 |
| 480 minutes |
|
|
|
|
TIMER RECORDING
You may set the TV/VCR to start and end a record- ing while you are away. You can set 8 programs to record on specific days, daily or weekly within a 1 year period.
In the example below, the timer is being set to record:
DATE: | July 6th, 2002 |
SETTING TIME: from 7:30PM to 8:50PM
CHANNEL: CH61
TAPE SPEED: SP
Make sure ...
• If a cable box or satellite box is connected with the |
TV/VCR you will be limited to record only one |
channel. And the channel selector on the TV/VCR |
must be selected to the output channel of the boxes |
CH 3 or CH 4 and then the actual channel to be |
Avoid over lap of programs ...
There is a chance that a program will not be record- ed. when programs overlap;
•The program with an earlier start has priority.
•Once the earliest program finishes, the overlapping programs will begin recording in sequence.
•The illustration below demonstrates the sequence of recordings.
Recording Sequence
Program 1
9:00AM | 10:00AM | 11:00AM | 12:00PM |
*Recording period is SHADED
1Select “TIMER PROGRAMMING”
Press the MENU button on the remote control.
Confirm “TIMER PROGRAM- | – M E N U – |
MING” is pointed by pressing the | PICTURE CONTROL |
| B TIMER PROGRAMMING |
PLAY/K button. | SETTING CLOCK |
USER’S SET UP | |
| CHANNEL SET UP |
And press the F.FWD/B button. | LANGUAGE [ENGLISH] |
TIME SEARCH | |
| ZERO RETURN |
•If you have not yet set the clock,
“MANUAL CLOCK SET” appears. If so, follow stops [3] to [8] on page 12. Then set the timer recording.
2Select your desired program position (1~8)
Press the PLAY/K or STOP/L but- | – TIMER PROGRAMMING – | ||||
| |||||
ton to select the desired program | CH DATE | BEGIN END | |||
- - | |||||
position. | |||||
- - | |||||
| - - | ||||
Then, press the F.FWD/B button. | B - - | ||||
- - | |||||
| - - | ||||
| - - | ||||
| - - | ||||
recorded must be selected on the boxes. |
• Clock must be set to the correct time and date |
before setting the timer. |
• TV/VCR power must be turn on to program it. |
• Insert a cassette tape with its erase prevention tab |
in place. (If necessary, rewind or fast forward the |
tape to the point at which you want to begin |
3Set the channel number
Press the PLAY/K or STOP/L but- ton until the desired channel num- ber appears.
(Example: CH61)
Then, press the F.FWD/B button.
– TIMER PROGRAMMING –
CH | DATE | BEGIN | END |
- - | |||
- - | |||
- - | |||
B 61 | |||
- - | |||
- - | |||
- - | |||
- - |
recording.) |
• The channel you want to record is properly set in |
advance. |
Remember: If the TV/VCR is connected to a cable box or satellite box, the TV/VCR must be on CH3 or CH4, then the channel to be recorded is selected on the cable box or satellite box.
4Select once, every day or weekly recording
For once recording :
– TIMER PROGRAMMING –
Press the PLAY/K (up) button | CH DATE | BEGIN END | ||
until the desired date appears. | - - | |||
- - | ||||
(Example: “7/06” for July 6th). | - - | |||
- - | ||||
| B 61 | 7/06 SAT | ||
Then, press the F.FWD/B but- | - - | |||
- - | ||||
| - - | |||
ton.
- 20 - | EN |
9J27
