Sylvania 6427TEL owner manual Preparation for USE, Operations

PICTURE CHANNEL SET [ENGLISH] ESPAÑOL V-CHIP SET UP CAPTION [OFF]

TV SOUND [MAIN]

PICTURE CHANNEL SET

[ENGLISH] ESPAÑOL V-CHIP SET UP CAPTION [OFF]

TV SOUND [MAIN]

PICTURE

CHANNEL SET [ENGLISH] ESPAÑOL V-CHIP SET UP CAPTION [OFF]

TV SOUND [MAIN]

ADD/DELETE AUTO PRESET CH

PREPARATION FOR USE

LANGUAGE SELECTION

If you want to change the language of the on-screen menu, follow the proce- dure below.

1) Connect the power cord to a standard AC outlet. Note: If some digits appear in the corner of the screen,

press the POWER button without unplugging the power cord.

2)Press the POWER button to turn on the TV.

3)Press the MENU button so that the menu display appears

on the TV screen.

4) Press the CH(annel) ▲ or ▼ button to point to “[ENGLISH]”.

5) Select “ENGLISH” or “ESPAÑOL”=Spanish by using the VOL(ume) ▲ or ▼ button.

3)Press the VOL(ume) ▲ button so that “ADD/DELETE” is selected.

4)Use the CH(annel) ▲ or ▼ button to select the channel you wish to put into memory or to erase from memory.

Note: The display will return to the normal screen automatically in about 10 seconds.

Perform “ADD/DELETE” function while this display appears on the screen.

●Press the VOL(ume) ▲ or ▼ button to light up the channel number in LIGHT BLUE if you wish to add the channel into memory.

●Press the VOL(ume) ▲ or ▼ button to light up the channel number

in LIGHT RED if you wish to erase the channel from memory.

5) Press the MENU button to exit the menu.

ADD/DELETE AUTO PRESET CH

6) Press the MENU button to exit the menu.

CHANNEL SETTING

To change a preset channel, follow the procedure below.

1) Press the POWER button to turn on the TV.

2) Press the MENU button so that the menu display appears on the TV screen.

3) Press the CH(annel) ▲ or ▼ button to point to “CHANNEL SET”. Then, press the VOL(ume) ▲ button.

4) Press the CH(annel) ▲ or ▼ button to point to “AUTO PRESET CH”. Then, press the VOL(ume) ▲ button.

The tuner scans and memorizes all active channels in your area.

●The TV distinguishes between standard TV channels and cable (CATV) channels.

●When AUTO PRESET CH action is completed, the lowest memorized channel reappears on the screen.

●When you press the CH(annel) ▲ or ▼ button after selecting “AUTO PRESET CH”, the tuner will stop at the memorized channels only.

●The TV may recognize TV channels to be CATV channels if reception conditions are poor. In this case, try AUTO PRESET CH action again after checking antenna connections.

●When AUTO PRESET CH is activated where there is no TV signal input, “NO TV SIGNALS” will appear on the display after the completion of channel scanning.

[ADD/DELETE FUNCTION]	PICTURE
1) Press the MENU button so that the menu display appears on the TV screen.	CHANNEL SET
2) Press the CH(annel) ▲ or ▼ button to point to “CHANNEL SET”.	[ENGLISH] ESPAÑOL
	V-CHIP SET UP
Then, press the VOL(ume) ▲ button.	CAPTION [OFF]
	TV SOUND [MAIN]

MTS (Multi-Channel Television Sound) SYSTEM

You can listen to a program in MTS stereo by following the steps below.

Menu				To show the status, press the DISPLAY
Selection	MAIN	MONO	SAP	button on the remote control.
Type of
broadcast
Regular	-None-	-None-	-None-
				SAP: Second Audio Program, which
Stereo	STEREO	MONO	STEREO	means your program, can also be
broadcast				received in a second language or
SAP	MAIN	MAIN	SAP	sometimes a radio station.

[To Select STEREO, MONO or SAP in Stereo broadcast]

1)Press the MENU button so that the menu display appears on the TV screen.

2)Press the CH(annel) ▲ or ▼ button to point to “TV SOUND”.

3)Press the VOL(ume) ▲ or ▼ button to select your desired stereo mode. ([MAIN], [MONO] or [SAP].)

: Press the VOL(ume) ▲ or ▼ button.

PICTURE Menu		PICTURE		PICTURE
Selection	MAIN	CHANNELMONOSET	SAP	CHANNEL SET
CHANNEL SET
Type of		[ENGLISH] ESPAÑOL		[ENGLISH] ESPAÑOL
[ENGLISH] ESPAÑOL
broadcast		V-CHIP SET UP		V-CHIP SET UP
V-CHIP SET UP
CAPTIONRegular[OFF]	-None-	CAPTION-None[OFF]-	-None-	CAPTION [OFF]
TV SOUND [MAIN]		TV SOUND [MONO]		TV SOUND [SAP]
Stereo	STEREO	MONO	STEREO
broadcast
SAP

RESUME FUNCTION

If the power fails or is disconnected while the TV is powered on, the TV will turn on automatical- ly when the power resumes.

OPERATIONS

WATCHING A TV PROGRAM

1)Press the POWER button to turn on the TV.

2)Select the desired channel with the CH(annel) ▲ or ▼ button.

3)Adjust the volume to the desired listening level using the VOL(ume) ▲ or ▼ button.

4)Adjust picture controls for a natural looking image. (See “PICTURE ADJUSTMENT”.)

SETTING THE SLEEP TIMER

The sleep timer function allows you to have the power automatically turn off after a set time period.

1)Press the POWER button to turn on the TV and press the SLEEP button on the remote control.

2) You may change the sleep time by pressing the SLEEP button on the		SLEEP 10
remote control repeatedly. The timer can be set up to 90 minutes. Each
time the SLEEP button is pressed the time increases by 10
	To cancel the sleep timer:
minutes. (The timer display counts up and sleep timer will be	Press the SLEEP button
displayed on the screen when you press the SLEEP button.)	repeatedly until “SLEEP 0” is
Note: When you disconnect the unit from the AC outlet or	displayed.
when you have a power failure, the sleep time will be lost.

CLOSED CAPTION SELECTION

You may view specially labeled (cc) TV programs, movies, news, prerecorded tapes, etc. with either a dialogue caption or text display added to the program.

1)Press the MENU button so that the menu display appears on the TV screen.

2)Press the CH(annel) ▲ or ▼ button to point to “CAPTION”.

3)Press the VOL(ume) ▲ or ▼ button to select the mode you wish.

4)When done, press the MENU button to exit the menu.

: Press the VOL(ume) ▲ or ▼ button.

GAME MODE			do not press any buttons. Press the MENU
Set to the most suitable position for playback			and VOL(ume) ▲ button so that “PIC-
of video games.			TURE” is selected. Then press the
[+] : ON [ - ] : OFF			CH(annel) ▲ or ▼ button repeatedly until
BRIGHT			the display returns to the screen.
Adjust until the darkest parts of the picture are ●			If you adjust any picture control after you
as bright as you prefer.			set the Game mode to [ON], the Game mode
[+] : increase brightness	[-] : decrease brightness		is set to [OFF] automatically.
CONTRAST		[USING THE GAME BUTTON]
Adjust to increase or decrease contrast.
		You may also set Game mode and select front
[+] : increase contrast	[ - ] : decrease contrast
		A/V input mode at the same time by pressing
COLOR
		the GAME button on the remote control.
Adjust to be brilliant or pale color.
		“GAME” appears on the TV screen.
[+] : be brilliant color	[ - ] : be pale color
		●	To exit Game mode and front A/V input
TINT
			mode, press the GAME button again.
Adjust to obtain natural skin tones.
		●	To cancel Game mode only, follow the steps
[+] : greenish tone [ - ] : reddish tone
			in PICTURE ADJUSTMENT. GAME mode
SHARPNESS
			will be set to [OFF] automatically and
Adjust to detail in the picture.
			“VIDEO” (external input mode) instead of
[+]:increase sharpness [-]:decrease sharpness
			“GAME” appears on the TV screen.
Notes:
		●	If you press the GAME button when the TV
● “+” is achieved by pressing the VOL(ume)			is off, the TV turns on and will be in Game
▲ button and “-” by pressing the			mode and will select front A/V input mode
VOL(ume)▼ button.			automatically.

●In the above steps, the picture adjustment display will disappear from the TV screen automatically after about 10 seconds if you

: Press the CH(annel) ▲ or ▼ button.

[-]

GAME MODE [+]

[-]

BRIGHT

[+]

[-]CONTRAST [+]

[-]

COLOR

[+]

[-]

TINT

[+]

[-]SHARPNESS [+]

OFF

ON

PICTURE	PICTURE	PICTURE	PICTURE	PICTURE
CHANNEL SET	CHANNEL SET	CHANNEL SET	CHANNEL SET	CHANNEL SET
[ENGLISH] ESPAÑOL	[ENGLISH] ESPAÑOL	[ENGLISH] ESPAÑOL	[ENGLISH] ESPAÑOL	[ENGLISH] ESPAÑOL
V-CHIP SET UP	V-CHIP SET UP	V-CHIP SET UP	V-CHIP SET UP	V-CHIP SET UP
CAPTION [OFF]	CAPTION [ C1]	CAPTION [ C2]	CAPTION [ T1]	CAPTION [ T2]
TV SOUND [MAIN]	TV SOUND [MAIN]	TV SOUND [MAIN]	TV SOUND [MAIN]	TV SOUND [MAIN]

PICTURE ADJUSTMENT

1)Press the MENU button so that the menu display appears on the TV screen.

2)Press the VOL(ume) ▲ button so that “PICTURE” is selected.

3)Select the feature you wish to adjust with the CH(annel) ▲ or ▼ button and adjust it with the VOL(ume) ▲ or ▼ button.

V-CHIP SET UP

V-CHIP enables parents to prevent their children from watching inappropriate material on TV. V-CHIP reads the ratings for programming (except for news and sports programs, unedited movies on premium cable channels, and Emergency Broadcast System signals), then denies access to programming if the program's rating meets or exceeds the limitations you select. In this case, “PROTECTED PROGRAM by ...” message appears on the TV screen.

To block certain ratings, follow the steps in the next page.

●Programming may be rated by the Motion Picture Association of America (MPAA) or accord- ing to the Television Parental Guidelines. In order to block any inappropriate programming, set your limits in both places (MPAA RATING and TV RATING).

●You cannot access the menu when the “PROTECTED PROGRAM by ---” message appears. In this case, change to an unblocked channel, then press the MENU button.