–15 –EN
0C28
–15 –

LANGUAGE SELECTION

If you want to change the language of the on-screen
menu, follow the procedure below.
1
Press the SETUPbutton so that the
setup display appears on the TV
screen.
2
Press the Arrow Kor Lbutton to
point to "LANGUAGE".
3
Select "ENGLISH", "ESPAÑOL" = Spanish or
"FRANÇAIS" = French by using the Arrow Bor s
button.
4
Press the SETUPbutton to exit the setup.
NOTE:An on-screen display language must be
selected each for the TVmode and DVD mode.
CHANNEL SET
LANGUAGE [ENGLISH]
ESPAÑOL
FRANÇAIS
V-CHIP SET UP
CAPTION [OFF]
CHANNEL SET
LANGUAGE [ENGLISH]
ESPAÑOL
FRANÇAIS
V-CHIP SET UP
CAPTION [OFF]

CHANNEL PRESETTING

To preset a channel or to change a preset channel,
follow the procedure below.
1
Press the SETUPbutton so that the
setup display appears on the TV
screen.
2
Press the Arrow Kor Lbutton to
point to "CHANNELSET". Then,
press the Arrow Bbutton.
3
Press the Arrow Kor Lbutton to
point to "AUTO MEMO". Then,
press the Arrow Bbutton.
The tuner scans and memorizes all
active channels in your area.
•The TVdistinguishes between standard TV chan-
nels and cable channels.
•When AUTO MEMO action is completed, the low-
est memorized channel reappears on the screen.
•When you press the Arrow Kor Lbutton after
selecting AUTO MEMO, the tuner will stop at the
memorized channels only.
•The TV/VCR may memorize TVchannels as
CATVchannels if reception conditions are poor. If
this happens, try the AUTO MEMO action again
when reception conditions are better.
[ADD/DELETE FUNCTION]
1)Press the SETUP button so that the setup display
appears on the TVscreen.
2)Press the Arrow Kor Lbutton
to point to "CHANNELSET".
Then, press the Arrow Bbutton.
3)Press the Arrow Kor Lbutton
to point to "ADD/DELETE".
Then press the Arrow Bbutton.
4)Use the Arrow Kor Lbutton to
select the channel you wish to
put into memory or to erase from memory.
NOTE: The display will return to the screen in
about 10 seconds. Perform "ADD/DELETE" func-
tion while this display appears on the screen.
•Press the Arrow Bor sbutton to light up the
channel number in LIGHT BLUE if you wish to
add the channel into memory.
•Press the Arrow Bor sbutton to light up the
channel number in LIGHT RED if you wish to
erase the channel from memory.
5)Press the SETUP button to exit the setup.
CHANNEL SET
LANGUAGE [ENGLISH]
ESPAÑOL
FRANÇAIS
V-CHIP SET UP
CAPTION [OFF]
ADD/DELETE
AUTO MEMO
ADD/DELETE
AUTO MEMO
CHANNEL SET
LANGUAGE [ENGLISH]
ESPAÑOL
FRANÇAIS
V-CHIP SET UP
CAPTION [OFF]

Getting started

1
Connect the power cord to a standard AC outlet.
NOTE: If some digits appear in the corner of the
screen, press the POWER button without unplugging
the power cord.
2
Press the POWER button to turn on the TV/DVD.
3
Press the SELECT button on the remote control until
channel number or "TV" appears on the screen.
Then press the TVbutton.

TV SECTION

CHANNEL SET
LANGUAGE [ENGLISH]
ESPAÑOL
FRANÇAIS
V-CHIP SET UP
CAPTION [OFF]
SET UP FOR USE
TD250-Body 01.5.10 6:54 PM Page 15