TV/VCR SECTION
TV OPERATION AND SETTINGS
SECTION
WATCHING A TV PROGRAM
1 After antenna or cable connection is TV/VCR completed, connect the power cord into
a standard AC outlet.
2Press [POWER] to turn on the unit.
3Use [CH. K / L] or the Number buttons to select your desired channel number.
To use the number buttons
•Single digit channels: (Ex. 02, 03, 04 and so on) Press [0] first to select a single digit channel.
•Two digit channels: (Ex. 12, 38, 95 ...) Press two digits directly.
SLEEP TIMER / PICTURE CONTROL
You can set Sleep Timer and picture | TV/VCR |
| |
adjustment with [PICTURE / SLEEP]. |
|
•The menu changes as described below every time you press [PICTURE / SLEEP].
Sleep Timer | BRIGHT | CONTRAST |
SHARPNESSTINTCOLOR
SLEEP TIMER SETTING
The Sleep Timer function is used to turn off the
unit without pressing [POWER] after a desired time.
AND SETTINGS TV/VCR
•Tree digit channels: (Ex. 115, 125 ...)
Press [+100] first, then press the last two digits.
1Press [PICTURE / SLEEP] to
display the Sleep Timer menu.
SLEEP 0 MINUTE
OPERATION
4Use [VOL. X / Y] to adjust the volume.
Press [MUTE] to instantly
mute the sound. Press it again VOLUME 20
2 Within 5 seconds, set your desired sleep time |
using [s / B]. |
• [B]...Increase by 30 min. (Up to 120 min.) |
• [s]...Decrease by 30 min. |
TV
to restore the previous sound level.
C C C C C C C C C C C C C C C C
NOTE:
• To cancel the Sleep Timer, use [CLEAR] or [s / B]
/
NOTE: | to set the time to "0". | |
• Even if you turn off the unit in the DVD mode, the unit |
| |
3 To confirm the remainder time to shutdown, | ||
will be in the TV/VCR mode when you turn it on again. | ||
| press [PICTURE / SLEEP]. |
FUNCTIONS
TO WATCH CABLE OR SATELLITE CHANNEL
If the unit is connected to a cable box or satellite box, use [CH. K / L] to select CH3 or CH4 accord- ing to the output channel setting of the device and select desired channel on that device.
TO WATCH EXTERNAL INPUT
When an external equipment is connected to the front AUDIO/ VIDEO input jacks, press
[SELECT] or [CH. K / L] repeat-
PICTURE CONTROL
1Press [PICTURE / SLEEP]
BRIGHT
repeatedly until desired control – P P P P P P P C P P P P P P P + is displayed.
2Use [s / B] to adjust to your desired level within 5 seconds.
BRIGHT | to decrease brightness to increase brightness |
OPERATING CONTROLS AND
edly until "AUX" appears on the screen.
NOTE:
AUX
CONTRAST | to decrease contrast | to increase contrast |
COLOR | to pale | to brilliant |
|
|
|
TINT | to purple | to green |
SHARPNESS | to soft | to clear |
• Even if any power failure occurs, the unit will |
retain its memory for this feature. |
•If there is no signal input from the antenna terminal and no operation for 15 minutes, the unit will turn itself off automatically.
9
EN
