CLOCK SET UP
(AUTO / MANUAL)
TV/VCR
The unit clock must be set correctly so that VCR timer recording is possible. It is suggested that the clock be set manually when first setting up the unit, then set to [ON] the auto clock setting which will periodically correct the setting if necessary.
NOTE:
•If you cannot receive a station with time signals, auto clock setting cannot be performed. Use manu- al setting only.
5 Select the year |
|
|
|
|
Press [K / L] until your desired | – MANUAL CLOCK SET – | |||
year appears. | MONTH DAY |
| YEAR | |
(Example: “2005”) | 0 5 | / 0 6 | FRI | 2 0 0 5 |
|
|
|
| |
Then hit [B]. | HOUR | MINUTE |
| |
– – | : – – | – – |
| |
|
| |||
|
|
|
|
|
6 Select the hour |
|
|
|
|
Press [K / L] until your desired | – MANUAL CLOCK SET – | |||
hour appears. | MONTH DAY |
| YEAR | |
(Example: “5”, “PM”) | 0 5 | / 0 6 | FRI | 2 0 0 5 |
Then hit [B]. | HOUR | MINUTE |
| |
|
| |||
| 0 5 | : – – | PM |
|
MANUAL CLOCK SETTING
Make sure ...
•The unit must be turned on.
In the example below, the clock is to be set to:
DATE | May 6th, 2005 |
SETTING TIME | 5:40PM |
1Select “SETTING CLOCK”
Hit [SETUP]. | - TV/VCR SETUP - |
TIMER PROGRAMMING | |
Press [K / L] to point to “SET- | B SETTING CLOCK |
CHANNEL SET UP | |
USER’S SET UP | |
TING CLOCK”, then hit | |
CAPTION [OFF] | |
| LANGUAGE [ENGLISH] |
[ENTER]. | ZERO RETURN |
TIME SEARCH | |
| INDEX SEARCH |
2Select “MANUAL CLOCK SET”
Press [K / L] to point to “MANU- | – SETTING CLOCK – | |
AL CLOCK SET”, then hit | AUTO CLOCK | [ON] |
[ENTER]. | AUTO CLOCK CH SEARCH | |
AUTO CLOCK CH | [ 02 ] | |
| B MANUAL CLOCK SET |
|
| D.S.T. | [OFF] |
•If there is no local PBS station in your area or on your cable system, select “AUTO CLOCK” and hit [ENTER] to turn [OFF] this function before this step.
7 Select the minute
Press [K / L] until the | – MANUAL CLOCK SET – | |||
|
|
| ||
desired minute appears. | MONTH DAY | YEAR | ||
(Example: “40”) | 0 5 | / 0 6 | FRI 2 0 0 5 | |
HOUR | MINUTE | |||
| ||||
| 0 5 | : 4 0 | PM | |
8 Start the clock
Hit [SETUP]. | 5:40 PM |
Although seconds are not displayed, |
|
they begin counting from 00 when |
|
you hit [SETUP]. Use this feature |
|
to synchronize the clock with the |
|
correct time. |
|
NOTE: |
|
•When unplugging the AC cord or if there is a power failure for more than 3 seconds, you may have to reset the clock.
TO CHANGE CLOCK SETTING
If you want to change the clock, 1)Follow steps 1 to 2.
2)Select the item you want to change using [B] . 3)Enter correct numbers using [K / L].
3Select the month
Press [K / L] until your desired month appears.
(Example: May → “05”)
Then hit [B]. (Or hit [s] to go back one step.)
– MANUAL CLOCK SET –
MONTH | DAY | YEAR | |
0 5 | / | – – – – – – – – – | |
HOUR |
| MINUTE | |
– – | : | – – | – – |
4)Hit [SETUP] to start the clock.
4 Select the day | – MANUAL CLOCK SET – | |||
Press [K / L] until your desired day | MONTH DAY | YEAR | ||
appears. | 0 5 | / | 0 6 | – – – – – – – |
(Example: 6th → “06”) | HOUR |
| MINUTE | |
Then hit [B]. | – – | : – – | – – | |
|
|
|
| |
- 18 - | EN |
