TV/VCR SECTION
SET UP FOR USE
You can program the tuner to scan all the channels you receive in your area.
NOTE: Channel memory programming is NOT needed when connected to a cable box or satellite box. Just select the TV/DVD/VHS channel selector to the output channel of the cable box or satellite box (Ex CH3). Then select the channel to be viewed on the Cable Box or Satellite Box.
CHANNEL SET UP FOR THE
FIRST TIME
1Plug in the TV/DVD/VHS power cord
Plug the TV/DVD/VHS power cord into a standard AC outlet.
NOTE:
DELETING (OR ADDING)
CHANNEL
The channels you no longer receive or seldom watch can be deleted from the memory. (Of course, you can add the deleted channel into the memory again.)
• If some digits appear in the corner of the screen, press the POWER button without unplugging the power cord.
2Turn on the TV/DVD/VHS
Press the POWER button to turn on the TV/DVD/VHS.
1Select “CHANNEL SET UP”
Press the SETUP button on the remote control.
Press the Arrow K or L button to point to “CHANNEL SET UP”. Then, press the Arrow B button.
- TV/VCR SETUP -
TIMER PROGRAMMING SETTING CLOCK
BCHANNEL SET UP USER’S SET UP
TIME SEARCH INDEX SEARCH
3Select “ENGLISH” or “ESPAÑ OL” or
“FRANÇ AIS” | – SET UP – |
|
Select “ENGLISH” or | B LANGUAGE |
|
“ESPAÑ OL”=Spanish or | [ENGLISH] ESP | FRA |
|
| |
“FRANÇ AIS” =French using the | AUTO PRESET |
|
|
| |
Arrow B or s button. “[ ]” indi- |
|
|
cate the selected language. |
|
|
|
|
|
4 Begin auto preset | – SET UP – |
|
Press the Arrow K or L button to |
| |
LANGUAGE |
| |
point to “AUTO PRESET”. |
| |
[ENGLISH] ESP | FRA | |
Then press the Arrow B button. | B AUTO PRESET |
|
The tuner scans and memorizes all |
|
|
active channels in your area. |
|
|
NOTES:
•The TV/DVD/VHS distinguishes between standard TV channels and cable channels.
•If you want to play or record a video tape BEFORE presetting the tuner, you must press the SETUP button on the remote control. To preset the tuner again, see “CHANNEL SET UP AGAIN” on page 15.
•The TV/DVD/VHS may memorize TV channels as CATV channels if reception conditions is poor. If this happens, try AUTO MEMO action again when reception condsitions are better.
5After scanning
The tuner stops on the lowest memorized channel. If you want to recall the selected channels, you can select the desired channel directly with the remote control number buttons or CHANNEL K or L.
2 Select “ADD/DELETE CH” | – CHANNEL SET UP – |
Press the Arrow K or L button to | B ADD / DELETE CH (TV) |
point to “ADD/DELETE CH”. | AUTO PRESET |
|
Press the Arrow B button.
3Enter the desired channel number
Press the Arrow K or L button until your desired channel number
appears. (You can also use the num- | 08 |
| |
ber buttons or the CHANNEL K/L | ADD / DELETE |
button to enter it) (Example: CH8) |
|
4Delete (or add) it from (into) memory
Press the Arrow B or s button. The channel number changes to light red. The channel is deleted from memory.
•To delete another channel, repeat steps [3] and [4].
•If you press the Arrow B or s button again, the channel is memorized again.
5Exit the channel setup mode
Added channel: Light blue.
Deleted channel: Light red.
Press the SETUP button on the remote control to returns to TV mode.
NOTE: To confirm that channel(s) has been deleted or added, press the CHANNEL K or L button.
- 15 - | EN |
1C29
