Sylvania dv220sl8 Functions, B DISPLAY Setting, C AUDIO Setting, Still Mode, Default AUTO

BDISPLAY Setting

You can change the display functions. Follow steps 1 to 3 in the “CUSTOM Menu” section on page 20.

4 Select the desired item.
		or
DISPLAY menu
SETUP	DISPLAY
TV ASPECT		4:3 LETTER BOX
STILL MODE		AUTO
PROGRESSIVE		OFF

Note:

5

TV ASPECT:			QUICK
(Default: 4:3			LETTER BOX)			Select the
See note on the right.						desired
						setting.
	TV ASPECT	4:3 LETTER BOX			TV ASPECT		ENTER
	STILL MODE	AUTO			4:3 LETTER BOX
					4:3 PAN & SCAN
	PROGRESSIVE	OFF
					16:9 WIDE	or
				ENTER
STILL MODE:
(Default: AUTO)						Select the
See note on the right.						desired
						setting.
	TV ASPECT	4:3 LETTER BOX			STILL MODE		ENTER
					AUTO
	STILL MODE	AUTO			FIELD
	PROGRESSIVE	OFF
					FRAME	or
				ENTER

6To exit “TV ASPECT” or “STILL MODE” menu

SETUP

To complete “PROGRESSIVE” setting

ENTER

Note:

TV ASPECT:

• Select “4:3 LETTER BOX”, so

that black bars may appear

on the top and bottom of the

TV screen.

• Select “4:3 PAN & SCAN” for a

PROGRESSIVE:

• You can set “PROGRESSIVE” to

“OFF” in “DISPLAY” menu or

press and hold [PLAY B] on this

unit for more than 5 seconds

during playback until the PRO-

GRESSIVE SCAN indicator on this

unit turns off.

• When “PROGRESSIVE” is “ON”,

video signals from the unit’s

PROGRESSIVE: QUICK

(Default: OFF)

See note on the left.

TV ASPECT	4:3 LETTER BOX	4:3 LETTER BOX
STILL MODE	AUTO	AUTO
PROGRESSIVE	OFF	ON

ENTER

SETUP

full height picture with both

sides adjusted.

• Select “16:9 WIDE” if a wide-

screen TV is

connected to this unit.

STILL MODE:

• Select “AUTO” usually.

• If you select “AUTO”, it

automatically selects the

best resolution setting

(“FRAME” or “FIELD”) based

VIDEO OUT and S-VIDEO OUT

jacks will be distorted or not be

output at all.

Note:

•In “QUICK” menu, “PLAYER MENU”, “TV ASPECT”, “PROGRESSIVE” or “DOLBY DIGITAL” are available. “QUICK” menu consists of the setting menu frequently used, and they are accompanied with QUICK . You can make all settings in “CUSTOM” menu.

If there is no picture or you do not press any buttons for 15 seconds, “PROGRES- SIVE” will switch to “OFF” and it will exit the “SETUP” menu.

Before proceeding…

1.Make sure your TV has progressive scan.

2.Connect with component video cable

NOTE: If there is no picture or picture is distorted after selecting ‘YES’,

wait about 15 seconds for auto recovery.

Activate Progressive?		NO
		YES
SELECT: K / L	SET:ENTER

Confirm again to use progressive scan. If Picture is good, select ‘YES’.

NO

YES

SELECT: K / L SET:ENTER

Select “Yes”.

or

ENTER

Select “Yes”.

or

on the data characteristics of

the pictures. (default)

• If you select “FIELD”, the

picture in the still mode will

be stabilized.

• If you select “FRAME”, the

picture in the still mode will

be highly defined.

• An individual picture on

the TV screen is called a

“frame”, which consists of

two separate images called

as “field”.

• Some pictures may be

blurred if you select “AUTO”

in the still mode due to their

data characteristics.

FUNCTIONS

CAUDIO Setting

Choose the appropriate audio setting for your device. It only affects during the playback of DVD discs. Follow steps 1 to 3 in the “CUSTOM Menu” section on page 20.

DVD

4 Select the desired item.
	or
AUDIO menu
SETUP	AUDIO
DRC		ON
DOWN SAMPLING		ON
DOLBY DIGITAL		BITSTREAM

Note:

•In “QUICK” menu, “PLAYER MENU”, “TV ASPECT”, “PROGRESSIVE” or “DOLBY DIGITAL” are available. “QUICK” menu consists of the setting menu frequently used, and they are accompanied with QUICK . You can make all settings in “CUSTOM” menu.

5

DRC (Dynamic Range Control):

(Default: ON)

Set to “ON” to compress the range between soft and loud sounds.

DRC	ON		OFF
DOWN SAMPLING	ON		ON
DOLBY DIGITAL	BITSTREAM		BITSTREAM
		ENTER

DOWN SAMPLING: (Default: ON)

Set to “ON” when outputting in 48kHz.

Set to “OFF” when outputting the original sound.

DRC	ON		ON
DOWN SAMPLING	ON		OFF
DOLBY DIGITAL	BITSTREAM		BITSTREAM
		ENTER

DOLBY DIGITAL: QUICK

(Default: BITSTREAM)

Set to “BITSTREAM” when the unit is connected to a Dolby Digital decoder.

•BITSTREAM: outputs Dolby Digital signals.

•PCM: converts the Dolby Digital into PCM (2 channel).

DRC	ON	ON
DOWN SAMPLING	ON	ON
DOLBY DIGITAL	BITSTREAM	PCM

ENTER

6To exit the menu

SETUP

Note:

DRC:

•This function is available only on the discs which are recorded in the Dolby Digital format.

DOWN SAMPLING:

•When playing back a 96kHz disc with the copyright protection, or when virtual surround is set to “1” or “2”, the sound will be down sampled at 48kHz even if the “DOWN SAMPLING” is set to “OFF”.

•This function is available only on digital outputting of a disc recorded in 96kHz.

– 21 –

EN