Reset to the Default Setting (Except for PARENTAL Setting)

1

2

 

 

3

SETUP

 

ENTER

 

ENTER

 

 

 

STOP

 

 

 

 

 

 

 

ENTER

Select “YES”.

<SETUP MENU>

 

Select “INITIALIZE”.

 

 

 

 

 

 

 

 

INITIALIZE

QUICK SETUP

 

QUICK SETUP

 

Initialize?

 

 

 

 

PLAYER MENU

ENGLISH

PLAYER MENU

ENGLISH

NO

TV ASPECT

4:3 LETTER BOX

TV ASPECT

4:3 LETTER BOX

YES

PROGRESSIVE

OFF

PROGRESSIVE

OFF

DOLBY DIGITAL

BITSTREAM

DOLBY DIGITAL

BITSTREAM

ENTER

4To exit the menu

 

SETUP

ENTER

 

Press

Hint

twice.

• When you cancel

 

to initialize at step

 

3, select “NO”.

Information

Troubleshooting Guide

If the unit does not perform properly when operated as instructed in this Owner’s Manual, check the unit consulting the following checklist.

Problem

Solution

No power

–Check if the AC power cord is properly connected.

–Unplug the outlet once, and wait for 5-10 seconds and then plug it in again.

 

 

–Check if the TV is switched on.

No sound or picture

–Check the video connection.

–Check the VIDEO/AUDIO cable connections to the TV.

 

 

(See page 6.)

 

–Sometimes a small amount of picture distortion may appear.

 

This is not a malfunction.

Distorted picture

–Connect the unit directly to the TV.

–Set PROGRESSIVE correctly. Turn it on only if your TV has Progressive Scan and you are

 

 

using the Component Video connections between the unit and the TV. Disable Progressive

 

Scan for all other connections. (See page 7.)

Completely distorted picture or

–Connect the unit directly to the TV.

–Make sure the disc is compatible with the unit.

black/white picture with DVD

–Check if the INTERLACE / PROGRESSIVE mode is set correctly. See pages 14-15.

 

No sound or distorted sound

–Adjust the volume.

–Check that the speakers are connected correctly.

 

No audio at digital output

–Check the digital connections.

–Check if the audio format of the selected audio language matches your receiver capabilities.

 

No DTS audio is output.

–This unit does not support DTS audio.

This is not a malfunction.

 

Picture freezes momentarily during

–Check the disc for finger prints/scratches and clean with a soft cloth wiping from center to edge.

playback.

 

 

–Clean the disc.

 

–Ensure the disc is inserted in correct direction.

Disc can’t be played.

–Check if the disc is defective by trying another disc.

–Cancel the parental lock or change the control level.

 

 

–Insert a correct disc that plays on this unit.

 

–Handle a disc with special care so that it does not have fingerprints, scratches, or dusts on its surface.

No return to start-up screen when

–Reset the unit by switching the unit off, then on again.

disc is removed.

 

 

–Aim the remote control directly at the sensor on the front of the unit.

 

–Reduce the distance to the unit.

 

–Replace the batteries in the remote control.

The unit does not respond to

–Re-insert the batteries with their polarities (+/– signs) as indicated.

–Tune your radio to an empty AM station so that you hear a lot of noises. Then, turn the volume

the remote control.

up. If you hear some signal sound from the radio by pressing buttons on the remote control, the

 

 

remote control is working.

 

–Press and hold any button on remote control toward a digital camera. The remote control is

 

working if you confirm infrared light through the digital camera.

Buttons do not work or the unit stops

–To completely reset the unit, unplug the AC cord from the AC outlet for 5-10 seconds.

responding.

 

The unit does not respond to some

–Operations may not be permitted by the disc. Refer to the instructions of the disc.

operating commands during playback.

 

The unit cannot read CDs / DVDs.

–Use a commonly available cleaning CD / DVD to clean the lens before sending the unit for

repair.

 

Angle does not switch.

–The angle cannot be switched for DVDs which do not contain multiple angles. In some cases

multiple angles are only recorded for specific scenes.

 

Playback does not start

–Check the “PARENTAL” setting.

when the title is selected.

 

The password for rating level

–Enter the default password “4737”, then your forgotten password will be cleared.

has been forgotten.

 

NOTES:

Some functions are not available in specific modes, but this is not a malfunction. Read the description in this Owner’s Manual for more details on correct operations.

Playback from a desired track and random playback are not available during program playback.

Some functions are prohibited on some discs.

– 17 –

EN

Information

DVL150G_E6C21UD.indd 17

2006/05/10 9:37:17

Page 17
Image 17
Sylvania DVL150G owner manual Information, Troubleshooting Guide, Reset to the Default Setting Except for Parental Setting