Sylvania LC320SS9 A 5PC Settings, Horizontal Position, Vertical Position, Clock, Phase

5PC Settings

This function lets you adjust the PC screen position, clock and phase during PC input.

1Press [SETUP] to display the main menu.

2Use [Cursor K/L] to select “DETAIL”, then press [ENTER].

5Adjust the setting.

Auto Adjustment

Use [Cursor K/L] to select “Adjust”, then press

[ENTER].

Auto Adjustmentj

This function automatically adjusts	Cancel
the position, clock and phase of	Adjust
the picture element.

INTRODUCTION PREPARATION INITIAL SETTING

3Use [Cursor K/L] to select “PC settings”, then press [ENTER].

Detailil

Closed Caption

V–chip

PC Settings

HDMI1 Audio Auto

4Use [Cursor K/L] to select the setting you want to adjust, then press [ENTER].

PC Settinings

Auto Adjustment

Horizontal Position	0
Vertical Position	0
Clock	0
Phase	0

•The Horizontal/Vertical position, clock and phase of the PC screen are automatically adjusted.

Horizontal Position, Vertical Position

Use [Cursor s/B] to adjust.

			Cursor s	Cursor B
Horizontal Position			to move PC	to move PC
H. Position	0	-
			+	screen right
Adjust		Move	screen left
			ENTER Enter
Vertical Position			to move PC	to move PC
V. Position	0	-
			+	screen up
Adjust		Move	screen down
			ENTER Enter

Clock, Phase

Use [Cursor {/B] to adjust the “Clock” setting to stabilize the PC screen and the “Phase” setting to improve the clarity of the PC screen.

			Cursor s	Cursor B
Clock
Clock	0
Adjust	Move	ENTER Enter	to decrease	to increase
Phase			setting value	setting value
Phase	0
Adjust	Move	ENTER Enter

6Press [SETUP] to exit.

WATCHING TV OPTIONAL SETTING TROUBLESHOOTING INFORMATION

Note:

•Adjust the “Phase” setting after the “Clock” setting has been properly adjusted.

•You may not obtain an appropriate screen with auto adjustment for some signals. In this case, adjust the settings manually.

31

EN