Sylvania LD155SC8 owner manual Main Menu, Auto Channel Scan

INITIAL SETTING

5Main Menu

This section describes the overview of the main menu displayed when you press [SETUP]. For more details, see the reference page for each item. The main menu consists of the function setting items below.

5Auto Channel Scan

If you switch wires (e.g., between antenna and CATV) or if you move the unit to a different area after the initial setting, or if you restore the DTV channel you deleted, you will need to perform auto channel scan.

Press [SETUP].

e.g.) digital TV mode

- TV SETUP -

CHANNEL SETUP
V-CHIP SETUP
LANGUAGE	[ENGLISH]
CAPTION	[OFF]
BACK LIGHT	[BRIGHT]
COLOR TEMP.	[NORMAL]
DTVCC

• CHANNEL SETUP

You can automatically scan the viewable channels and remove those that are undesired.

(Refer to “Auto Channel Scan” on page 14.)

•V-CHIP SETUP

You can set the viewing limitations. (Refer to “V-chip” on page 24.)

•LANGUAGE

You can change the language (English, Spanish, French) displayed on the main menu.

(Refer to “Language Selection” on page 15.)

• CAPTION

You can change the display format for closed caption, which displays the dialogue of a TV program or other information across the TV screen.

(Refer to “Closed Caption” on page 21.)

• BACK LIGHT

You can set the desired brightness mode. (Refer to “Back Light Setting” on page 23.)

• COLOR TEMP

You can adjust color temperature (“NORMAL”, “WARM” and “COOL”). (Refer to “Color Temperature” on page 24.)

•DTVCC

In addition to the basic closed caption described on page 22, DTV has its own closed caption called DTVCC. (Refer to “DTV Closed Caption” on page 22.)

Before you begin:

Make sure if the unit is connected to antenna or cable.

1 Press [SETUP] to display the main menu.

2 Use [Cursor K/L] to select “CHANNEL SETUP”, then

press [ENTER].

e.g.) digital TV mode

	- TV SETUP	-
or	CHANNEL SETUP
	V-CHIP SETUP
	LANGUAGE	[ENGLISH]
	CAPTION	[OFF]
	BACK LIGHT	[BRIGHT]
	COLOR TEMP.	[NORMAL]
	DTVCC

3 Use [Cursor K/L] to select your desired preset type, then press [ENTER].

e.g.) digital TV mode

--- CHANNEL SETUP ---

or

ADD/DELETE (DTV)

AUTO PRESET CH (DTV) AUTO PRESET CH (TV/DTV) AUTO PRESET CH (CATV)

! CATV takes approx. 50min.

•When aerial antenna is connected, select “AUTO PRESET CH(TV)”, “AUTO PRESET CH(DTV)” or “AUTO PRESET CH(TV/DTV)”.

•When connected to CATV, select “AUTO PRESET CH (CATV)”.

•Scanning and memorizing the channels automatically start.

e.g.) digital TV mode

D25

AUTO PRESET CH(DTV)

• When the scanning and memorizing are completed, the lowest memorized channel will be displayed.

• When you selected “AUTO PRESET CH(TV/DTV)”, the lowest memorized analog channel will be displayed when the scanning and memorizing are completed. If there is no analog channel, the lowest memorized digital channel will be displayed.

14

EN