Sylvania LD155SC8 owner manual Optional Setting, Channel Add/Delete, Picture Adjustment, Cursor

OPTIONAL SETTING

5Channel Add/Delete

The channel add/delete function lets you add the channel that was not added by the auto channel scan due to the reception status at the initial setting. You can also delete the unnecessary channels.

1 Press [SETUP] to display the main menu.

2 Use [Cursor K/L] to select “CHANNEL SETUP”, then

press [ENTER].

e.g.) digital TV mode

	- TV SETUP	-
or	CHANNEL SETUP
	V-CHIP SETUP
	LANGUAGE	[ENGLISH]
	CAPTION	[OFF]
	BACK LIGHT	[BRIGHT]
	COLOR TEMP.	[NORMAL]
	DTVCC

3 Use [Cursor K/L] to select “ADD/DELETE(DTV)” or “ADD/DELETE”, then press [ENTER].

e.g.) digital TV mode

--- CHANNEL SETUP ---

or

ADD/DELETE (DTV)

AUTO PRESET CH (DTV) AUTO PRESET CH (TV/DTV) AUTO PRESET CH (CATV)

! CATV takes approx. 50min.

Note:

•”ADD/DELETE(DTV)” or “ADD/DELETE” menu will disappear automatically in about 10 seconds.

•In the digital mode (DTV), you can add or delete channels only for major channel.

•Once you delete a DTV channel, you cannot recover the channel without performing auto channel scan again. (Refer to “Auto Channel Scan” on page 14.)

5Picture Adjustment

You can adjust brightness, contrast, color, tint and sharpness.

1 Press [PICTURE] to adjust the picture quality.

2 Use [Cursor K/L] to select the picture quality type you want to adjust.

[BRIGHTNESS]

[CONTRAST]

or

[COLOR]

[TINT]

[SHARPNESS]

4 Select the channel you want to add or delete. (Refer to “Channel Selection“ on page 16.)

e.g.) digital TV mode D25

ADD/DELETE : DTV

5 Use [Cursor s/ B] to select “ADD” or “DELETE”.

or

•To add or delete another channels, repeat steps 4-5.

•Color of channel number displayed at the right top of the TV screen indicates;

3 Within 5 seconds, use [Cursor s / B] to adjust the quality.

or

	3	4
	Cursor	Cursor
BRIGHTNESS	to decrease brightness	to increase brightness
CONTRAST	to decrease contract	to increase contract
COLOR	to decrease color	to brighten color
TINT	to add purple	to add green
SHARPNESS	to make soft	to make clear

4 Press [RETURN] to exit.

-Blue: The selected channel will be added.

-Red: The selected channel will be deleted.

6 Press [SETUP] to exit.

Note:

•The picture adjustment setting display will automatically disappear in 10 seconds.

20

EN