Sylvania LD370SC8 S 5HDMI Audio, Repeat steps 1 and 2 in Closed Captionon, Press Enter

5Press [SETUP] to exit.

Note:

•Adjust the “Phase” setting after the “Clock” setting has been properly adjusted.

•You may not obtain an appropriate screen with auto adjustment for some signals. In this case, adjust the settings manually.

5HDMI Audio

You can set the method of sound input for the HDMI 1-IN jack.

1Repeat steps 1 and 2 in “Closed Caption”on page 22.

2Use [Cursor K/L] to select “HDMI1 Audio”, then press

[ENTER].

Detailil

Closed Caption
V–chip
PC Settings
HDMI1 Audio	Auto
Blue LED	Power on

3Use [Cursor K/L] to select the desired sound input, then press [ENTER].

Detailil

Closed Caption
V–chip
PC Settings
HDMI1 Audio	Auto
Blue LED	Digital
	Analog

		Select if you have connected both
		digital device to the HDMI 1-IN
	Auto	jack and analog device to the
		audio sources. Digital audio input
HDMI1		signal will have priority.
		Select if you have connected
Audio
	Digital	digital device to the HDMI 1-IN
		jack for digital audio input signal.
		Select if you have connected
	Analog	analog device to the analog audio
		jacks for analog audio input signal.

4Press [SETUP] to exit.

5Blue LED	INTRODUCTION
You can set the blue LED on the front panel to light up when the unit is
turned on or when a disc is inserted.

1Repeat steps 1 and 2 in “Closed Caption”on page 22.

								CONNECTION
2 Use [Cursor					Detailil
		K
	[ENTER].
					Closed Caption
					V–chip
					PC Settings
					HDMI1 Audio	Auto
					Blue LED	Power on		INITIAL
								SETTING
3 Use [Cursor		K	/L] to select the desired setting, then
	press [ENTER].
					Bluel LED
					This function sets the Blue LED.		Power on
					When TV is on,		Disc in
					Power on:
							Off	WATCHINGTV
					LED is always on.
					Disc in:
					When disc is inserted, LED is on.
					When disc is not inserted, LED is off.
					Off:
					LED is always off.
		Power on		Lights up while the unit is turned
				on.				OPTIONAL
	Blue LED	Disc in		Lights up when a disc is inserted.
				Lights off when there is no disc.
		Off		Turns off the Blue LED.				SETTING
4 Press [SETUP] to exit.
								OPERATING DVD
								SETTING DVD
								TROUBLESHOOTING
								INFORMATION

27

EN